• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

6 Dasher Question

Been searching and can not find the answer to my question so I will ask. I have a couple dashers and building another, have had good lock fire forming using the COW method but wanted to try something different this go around. I think I read somewhere on here where some was using a full load of powder no bullet and hold barrel up and fire. I of coarse have the false shoulder formed already. Anyone doing this are do I have my wires crossed? Any help wound be appreciated.
Terry Pohl
 
Even after the 2nd firing? I get about 80% formed with the COW then turn necks, load standard BR load with junk bullets and finish forming with that. Just thought I would try something different. Hate the smell of the COW also.
 
I have used Bullseye or Titewad powder at 11 or 12 grains with 1/4 sheet toilet tissue wadded up and pushed all the way to hold small charge against the primer. I now have a hydro form die and thats the best solution.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,277
Messages
2,214,924
Members
79,496
Latest member
Bie
Back
Top