6 Dasher Modified Case for Hornady Length Gage

[cwall64]

Does anyone make a modified case for the 6 Dasher to use with the Hornady tool?

 

[cwall64]

Thanks!

 

[savagedasher]

Does anyone make a modified case for the 6 Dasher to use with the Hornady tool?

I have found it's best to make you own from brass fired in your chamber. All it takes is a drill and tap . Larry

 

[wiuprof]

I have found it's best to make you own from brass fired in your chamber. All it takes is a drill and tap . Larry

+1
Specifically, I use a 19/64" drill bit and a 5/16"-36 tap. I've made modified cases for my Dashers and other cartridges that aren't offered from Hornady.
Like 6x47 Lapua, 6 Creedmoor, 6.5x47 Lapua, etc.

 

[Bmat]

You can buy one at this website

http://www.6mmar.com/6mm_Dasher.php

 

[savagedasher]

+1
Specifically, I use a 19/64" drill bit and a 5/16"-36 tap. I've made modified cases for my Dashers and other cartridges that aren't offered from Hornady.
Like 6x47 Lapua, 6 Creedmoor, 6.5x47 Lapua, etc.

I didn't have that information in my tree stand
Thanks for sending . Larry

 

[waterfwlr]

Yes. There area couple members here that make and sell them. Try member Ridgeway.

 

[Phil]

Yes. There area couple members here that make and sell them. Try member Ridgeway.

Chuck Ridgeway used to make them, PM him and ask.......


I really like Alex`s way though....

 

[spitfire_er]

I have made a lot for other people.

 

[rifle48]

Does anyone make a modified case for the 6 Dasher to use with the Hornady tool?

call Hornady, send them 3 fired cases not sized & $15.00 they will send you a modified case for your gauge