• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

6.5x47 Lapua to 260 Rem

Has anyone converted a 6.5X47 Lapua to 260 Rem. I dont think it can be done because the Lapua chamber is .002 larger than the 260 Rem chamber. However, thats very close. I'm just wondering if anyone has done it before and accepted the slightly oversized chamber.
 
Hyatus,
I haven't but what I am about to do for someone is make a 6.5*47 Long. We are going to send the 6.5*47 Reamer in another 4mm (160 thou or so). This effectively will be a 260 length cartridge with 6.5*47 front end. I have both Resizer and chamber reamers so will make the dies for it myself but you could still use a set of standard 6.5* 47 dies. Just send the 7mm 08 or 308 brass through the 6.5*47 die to form brass. Occasionally the base will need a bump in with another die though. I am just looking at what can be used and will post here when i find it.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,800
Messages
2,223,932
Members
79,861
Latest member
srak
Back
Top