Mark W
Gold $$ Contributor
There’s been a few threads on 44 Mag loading here lately. I just did a load work up, going from 23.0 to 25.5 H-110 in 1/2 grain increments. I used new Starline brass with Federal large pistol magnum primers and Hornady 240 Gr XTP and fired them out of my Henry lever action. The results were positive with 25.0 grains giving me a 2.5” group at 100 yards and 1,800 fps.
My question is if it would be worth while to do some more testing in smaller increments around 25.0 grains to try and fine tune it a little more?
My question is if it would be worth while to do some more testing in smaller increments around 25.0 grains to try and fine tune it a little more?