3rd Batch of 6XC brass

[DTubb]

For all of you who have patiently waited - Thanks!
SSS has been shipping about 3000 new 6XC cases each day this week.
If you have a backorder on file with us it will be soon filled.
DTubb

 

[JeffT]

David,
that is fantastic news, how is the load data you have listed for the 107's and 115's going to compare with this new brass?

Jeff

 

[DTubb]

Jeff,
Starting load data is still in the same range of 39 gr of H 4350 with a moly coated 115 -back off a grain for a bare bullet., I am assuming one has a reamer which cuts a proper throat for the 115)
Using a 105 or 107 one can certainly start 1/2 grain higher.
I am consistently getting around 3000 fps with my 115 out of 26.5 inch barrel using the above charge,39.+)
DTubb

 

[JeffT]

David,
thanks for the info, yes I had my chamber throated for the 115, I just wasn't sure how the new brass was going to compare capacity wise with the older stuff.


thanks again,
Jeff

 

[Cheechako]

David & Jeff

What exactly do you mean by "correctly throated" for the 115 DTAC? I used them earlier this year in the NBRSA 600 Yd Nationals. My reamer cuts a .121 freebore and a 1 1/2 degree throat. It seems like I could have used more freebore but don't want to compromise the ability to shoot shorter bullets.

Ray

 

[Changeling]

Jeff,
Starting load data is still in the same range of 39 gr of H 4350 with a moly coated 115 -back off a grain for a bare bullet., I am assuming one has a reamer which cuts a proper throat for the 115)
Using a 105 or 107 one can certainly start 1/2 grain higher.
I am consistently getting around 3000 fps with my 115 out of 26.5 inch barrel using the above charge,39.+)
DTubb

David, how fast can the 115 be driven,sanely) out of your case with say the same barrel 26.5 " ? Is H4350 your powder of choice for for the 105 - 115's
Changeling