3hours lost removing stuck case

[Bill K]

I have stuck one case, in years of reloading. That was man years ago and I was using the old lube pad, with the lube made or it's use. ( anyone with reloading knowledge will know what brand pad/lube) after that I went to the Imperial wax type and now use it and also the Hornady one shot, after it came out.
Have had no further problem by using either of these case lubes.
Just follow directions and they work super fine. But everyone is intitled to their opinion on any of the lubes.

 

[Minshooter]

Also not wanting to enter a lube debate, but just a caution that might
save someone from rust in their sizer die, if they bought a Lee loading kit.
If you use the Lee (white paste in a tube) case lube, be aware that it is water based,
and can rust a die very quickly if it isn't disassembled and cleaned soon after use.

 

[NorCalMikie]

I agree on the spray lube crap.

Bad Ju Ju. Imperial Sizing Wax. The ONLY way to fly.

 

[bsekf]

Imperial sizing wax and get a "stuck case remover kit".