300WSM folks

[Wolfdog91]

Quick question for you guys and gals running the .300wsm , What brass are y'all running? Can't seem to find any in stock. Especially on the more budget end of things. Just trying to load some up for hunting is all.
Thanks

 

[MUP]

I'm using WW brass but I haven't had to buy any in years tho.

 

[65swede]

ADG. I pre-ordered and received some from the last run. Next run is July.

ADG Brass - Unknown Munitions

ADG brass was designed not only for consistency, but for durability. One of the ways we accomplished this was adding material to the case in specific areas to strengthen it. With the additional material, our brass is heavier than most other manufacturers brass and therefore will require lower...

www.unknownmunitions.com

 

[stymie12000]

I started shooting a 300wsm this season. Brass comes and goes. When you see it in stock, buy it!

I'm running Norma now, no complaints so far (3 spicy reloads). I also just sourced some ADG. I sacrificed 6 cases (turned necks to thin) to test primer pockets. I'm on 4 spicy reloads with ADG. Waiting for Norma to wear out before moving to ADG..

It's not cheap but expect multiple reloads.

Keep looking, you will find some.

Unknown Munitions
Blue Collar
Drifters
Are your friend for ADG.

 

[joshb]

I’ll lend a hand. How many do you need?
Josh

 

[69mach]

i’ve retired 300wsm norma brass that had around 18 firings on them with no head separation. however i only ever bump the shoulder about 1 to 1.5 thou. if you can find it the norma brass is awsome and all i use anymore. the fed and win brass work good but aren’t nearly as durable as the norma. i haven’t had experience with adg brass.

you might try to buy 270wsm norma brass and just neck it up if you can’t find any 300wsm head stamp brass.