300 norma dies in 1-1/4×12

[Mudpro]

Looking for a 300 norma full length bushing sizing die in 1-1/4"×12. Been searching but havent been able to find anything.

 

[WAMBO]

Don't know for sure if he makes them but he does do custom dies larger than the standard 7/8x14.

Neil Jones Custom Products

Neil Jones Custom Products - Accuracy tools and components for the precision shooter

www.neiljones.com

 

[moondog]

Warner

 

[Kurz]

Looking for a 300 norma full length bushing sizing die in 1-1/4"×12. Been searching but havent been able to find anything.

I'm curious as to why you want this particular die thread size? Not that it's any of my business but I just would like to hear why.

Thanks!

 

[Steve Blair]

Wouldn't it be easier to use one of these?

Lee Precision, Inc.. Die Adapter Bushing Classic Cast Press

Threaded adapter to accept standard 7/8-14 dies for Classic Cast Press.

leeprecision.com

 

[moondog]

I know the bigger die is what I went with for my 338Imp after having issues with cracks in the standard die.

 

[Steve Blair]

I know the bigger die is what I went with for my 338Imp after having issues with cracks in the standard die.

I have Warner dies for .300 WSM and .284 Shehane But don't reload anything bigger.

 

[FireMedic]

Whidden will make you one. I have a set In 375 lapua improved

 

[Mudpro]

Looking for the bigger size to prevent cracking a die. The warner looks nice but i think ill be broke by the time i get one up into Canada. Ill have to check with Neil Jones and see if he will make his dies in that size.

 

[Kurz]

Looking for the bigger size to prevent cracking a die.

That's unfortunate. I load several large diameter cartridges and have never seen a cracked die and I do look. I'm not trying to be THAT exception at all, I've just not had this occur.

If the problems of cost and shipping (I understand...) prevent getting what you need up there, maybe try one of your more local gunsmiths and have them make a die for you. There are lots of gunsmiths down here who make dies for their clients so the possibility exists that you might find one more local to you. Otherwise, you might be stuck with the solutions suggested above, US manufacturers and the border problems.

I have Whidden and Warner dies, although not nearly as many as other brands due to the cost. Both companies have excellent customer service and will help get you through the process painlessly except for the cost.

Let us know how this turns out, please.

 

[dragman]

I had a Lapua Improved that i have the Versico (don't know how to spell it) dies they were HUGE! no worries about cracking them.

 

[FilippoMo]

Triebel make die set threaded 1-1/4 12
you can find a review on you tube
Filippo

 

[Mudpro]

Triebel make die set threaded 1-1/4 12
you can find a review on you tube
Filippo

I think thats what im going to try. I have one of their distributors checking if they can get me one and ship it to Canada.
Frank

 

[FilippoMo]

There are no restrictions on these items there should be no problem shipping to
Canada.
Filippo