.290 bushing in my FL sizing die

[Ironworker]

I loading 6.5 PRC ADG brass . Its been loaded 3-4 times . Unsized neck measures .296 so I run it into FL die with .290 bushing and it comes out measuring .296 !!!! What's going on ? I know my die is set correctly .

 

[rardoin]

Are you sure your bushing is in the die and the retaining screw set down enough to keep the bushing from floating completely and riding on top of the neck? I know that is a bit of an obvious but I have been known to overlook something simple at times.

 

[Ironworker]

Are you sure your bushing is in the die and the retaining screw set down enough to keep the bushing from floating completely and riding on top of the neck? I know that is a bit of an obvious but I have been known to overlook something simple at times.

BULLSEYE THAT IS EXACTLY WHAT THE PROBLEM WAS ! Thank you . All is well now.

 

[rardoin]

Don't ask me why I though of that as a first consideration.

 

[Uncle Ed]

Don't ask me why I though of that as a first consideration.

Some people just have a few loose screws..................

Bazinga

 

[PopCharlie]

Some people just have a few loose screws..................

Bazinga

Been there....done that.....didn't even get a t-shirt.