.22br Norma reamer

[Doug Beach]

Does anyone have a no-turn .22br Norma reamer they’d be willing to lend, or rent, to me? Looking to use ~75gr bullets, but I have a throating reamer, if your reamer is short on freebore.
Thanks in advance,
Doug

 

[kendog]

I have one. Not sure the neck dimensions I will measure it tomorrow.

 

[kendog]

I have a JGS 22 BR reamer marked ".22 BR Match" and ".243 ND"
JGS print #0822
Not sure if the .243 neck is standard or no-turn.

 

[Doug Beach]

I have a JGS 22 BR reamer marked ".22 BR Match" and ".243 ND"
JGS print #0822
Not sure if the .243 neck is standard or no-turn.

Thanks, Ken. Need at least .252 for no turn, with the Lapua brass I have on hand, anyway.

 

[RAG]

Does anyone have a no-turn .22br Norma reamer they’d be willing to lend, or rent, to me? Looking to use ~75gr bullets, but I have a throating reamer, if your reamer is short on freebore.
Thanks in advance,
Doug

Did you have any luck? I've been shooting the 6BR for 20 years, and now finally I'm set on chambering up a 22BR Norma/Lapua. Zero freebore for me, and my loaded rounds come to .2510. So I'm wanting around .253 neck, ideally. I might have to have a reamer made.

 

[NorCalMikie]

Build it the way YOU WANT IT!! Not to someone else's ideas/opinions. Can't go wrong with a ZERO freebore. You may be surprised at how fast the throat wears.
Freebore too short? You can always go longer but you can't go shorter.

 

[Doug Beach]

Did you have any luck? I've been shooting the 6BR for 20 years, and now finally I'm set on chambering up a 22BR Norma/Lapua. Zero freebore for me, and my loaded rounds come to .2510. So I'm wanting around .253 neck, ideally. I might have to have a reamer made.

No luck, project ended up on a back burner, anyway. If it makes its way to the front again, I’ll likely order a reamer.

 

[George Wilson]

Doug,
I have a PTG 22BR Norma reamer. See Schematic. Would be happy to lend it to you. Has no turn .252 neck. Reamer has been used for one chambering Only.