22BR H4350

[BradY]

Can anyone suggest me a starting load for 22BR and H4350 with 90gr bullets? Im thinking about 29.5gr and working up but a little unsure...

 

[johnmyers]

I'm using 31.2gr H4350 with 80SMK's and 82 Bergers with no pressure problems. Mild load running both at about 3050fps. I would probably start a little lower just to be safe. Good luck.

 

[skeetlee]

varget

 

[BradY]

I wont bother trying varget, filling that case as best I can and maintaining the 3000fps mark is the plan. Referring to the article on 90grJLK's and 22BR its stated that varget was too fast for these heavier bullets, it did work but there are better choices out there. If I was shooting 80gr or lighter then I would thinkabout it but not for 90's

 

[BradY]

Im up to 31.6gr of H4350 and CCI SR mag primers. No pressure signs as yet but I do have an excessively long throat after a miscalculation by me. Its getting fixed so I can get near the lands and get some accurate loads worked up. Havent chronied it yet either- waiting for the rechamber first.