• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

225 gr Accubond in 338 06

I achieved my highest velocity with RL17. I went up to 61.3 and found acceptable accuracy. Switched to 200gr bullets with H380 after testing that combo. Extremely accurate and consistent with mag primers.
 
Why did you switch to the 200 gr load? Im on the fence also

I found some old 200 Nosler ballistic tips that shot half an inch with 380. It was the easy button. Federal 200gr fusion are great bullets that shot well under an inch with a POI shift that was a click or two off, or not worth changing on a rifle I don't hunt past 200 with. It's built on a Stevens action.

The only place I could find sub MOA with the 225 AB was hard on Winchester 30-06 primer pockets, I can't find my notes on velocity but primers would flatten in the 3rd shot severely. All primer types, so I was never happy with that. I was noticing most people were loading around 63gr and I couldn't get close to that with all other powders almost perfectly reflecting predicted velocity so I just wrote that bullet off for that rifle.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
167,811
Messages
2,241,786
Members
80,816
Latest member
brianinca
Back
Top