22 PPC brass

[Lucky Shooter]

I'm getting started with a 22 PPC.

Which brass----Norma or Lapua 220 R ? Both brands will
require neck turning.

Will appreciate opinions.

A. Weldy

 

[Bronsin]

Lapua. No contest.

 

[AlNyhus]

I'm getting started with a 22 PPC.

Which brass----Norma or Lapua 220 R ? Both brands will
require neck turning.

Well, to start with...there are 22 PPC's and then there are 22 PPC's

What kind of 22PPC chamber are you working with?
-A factory 22PPC like the Sakos or Rugers?
-A tight necked BR style gun?

 

[Lucky Shooter]

This is a tight necked BR gun.

Some reamer print dimensions:
Case head .4443
.200 Fwd .4420
Shoulder .4320
Neck .243

Each brass will require neck turning
and I have some of both.

Hope this clarifies.

A. Weldy

 

[AlNyhus]

This is a tight necked BR gun.

Some reamer print dimensions:
Case head .4443
2" Fwd .4420
Shoulder .4320
Neck .243

Each brass will require neck turning
and I have some of both.

Hope this clarifies.

A. Weldy

Lapua 220R correctly f-formed to your chamber is the only way to go.

I assume your 2" Fwd .4420 to be .4420 @ .200 ahead of the extractor.......

 

[Lucky Shooter]

Lapua 220R correctly f-formed to your chamber is the only way to go.

I assume your 2" Fwd .4420 to be .4420 @ .200 ahead of the extractor.......

Thanks for the good look Al.

This should be .4420 at .200 forward of the case head.

A. Weldy