• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

2000mr vs varget in 223

vmaxpro

I ran outta varget and might look into 2000mr for my heavy 223 loads. Anybody have any experience with this powder?
 
I don't as of yet, but I am picking up 5 lbs of the stuff this weekend! From what I know, it is a lil slower burning than RL15. There are a couple of forum memebers that are using it (Matt P). Hopefully they will chime in. Matt says he is using in his rifle 27.0 grs and getting 2900 fps with the stuff. I like the idea that you get a very good load density with the powder. Being that it is a ball powder with supposidly the temp sensitivity of aa extruded powder. These are the qualities in 2000MR that I am looking for! Right now, I would say that with my current load using RL15 is not quite going that fast (2900). I am also curious about this powder in a couple of other cases as well!
 
I now use 2000MR exclusively for XTC and for Palma, all 223. The reason is nothing I have found can push a 90gr bullet faster. The accuracy is fine for my purposes. It is also better for 80gr bullets. Bullets lighter than 80gr can use different powders. I don't like changing powders in the middle of a match, thus I use this powder for 55gr and 75gr bullets, but its not optimal.

2000MR is very small grain, meters well, is very dense, and has high energy. Temperature sensitivity has been reported as 0.85fps/degree F. I have not verified this. I shoot in California so I don't get big temperature variations. My accuracy requirements are to hold the X-ring in an XTC match, which it does very nicely if I do my part. I have no experience with F-class or benchrest.
 
Well there is a match I Blakely, Ga that I am wanting to try this powder at, it is the first weekend of Nov. I am hoping that I will find a load that will exceed my current expectations with the RL15 powder that I am using now. I am currently using 25.0 grs of it under the Berger 90VLD.

Matt, thanks for stopping in and giving your view on the powder!
 
Ok sounds good thanks guys for the info. I am however shooting the 75s, but out of a 7 twist 28" tube, so it might be worth a shot! I could always jump to the 80s as well.
 
Yes , a bolt gun. Savage 12 BVSS.

I 've tried it in a 6BR with 70 Sierra BlitzKings and Hornady 75 V- Maxes looks like lots of potential.
 
Played around a little today with the 2000mr. I like it enough to give it a chance. If your guns not throated for the heavys dont waste your time imho. Velocity was higher than varget thats for sure, found a node around 3150 or so.
 
I have used both RL15 and 2000MR extensively. 2000MR is slower, far denser, meters better, and less temperature sensitive than RL15. Other than that, they are identical.
 
You must log in or register to reply here.

Similar threads

223 AI 2000MR ?
2
Replies
20
Views
2,834
Nomosendero
2000MR and 204Ruger
Replies
3
Views
792
pauls
So some 2000MR feedback
Replies
7
Views
2,224
Dshooter

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
166,251
Messages
2,214,872
Members
79,496
Latest member
Bie

Share This Page

Back
Top