20 vartarg and CFE BLK

[albertacoyotecaller]

I am just getting involved in the Vartarg. I have a load with Reloader 7 worked out but generally I like throwing ball powders for my high volume gopher shooting. I want to use CFE BLK but don’t see any good data references. I started at 18grs and went to 19.2. All primers seemed flat even though I see guys use as high as 19.2 gr. Using CCI 400 primers.

Anyone have any load data for this combination with 32 gr Vmax or Varmageddons?

 

[SeabeeKen]

LT-30 and N-120 shoot best in mine with 35 bergers. I went with N-120 after my hodgdon purge

 

[Just Say Moe]

LINK
I'm interested also. I found this post on Saubier.

 

[TheCZKid]

I've had a good load with 32 Vmax, CCI-400 primers and CFE BLK, 18.6 grains, 3708 fps, good groups.
Tested 18.4 to 19.2, for me the sweet spot was at 18.6. I didn't test this combo a lot, ended up finding my loads with RL7 and N120 were good and stuck with those, but CFE BLK shows promise.

Powder	Chg	SD	SD	FPS
CFE BLK	18.4	31.5		3587
	18.6	18.5		3708
	18.8	23.6		3724
	19.0	14.1		3792
	19.2	17.9		3795