20 MOA Scope Base

[twoodard]

Remember the inserts can be used for windage adjustment also,:

 

[chiefkerdog]

I will second the Bench Source . I mounted scope on my Savage BR and the windage was centered ( dead zero ) . Very handy when shooting 1K

 

[Nomad47]

I am currently having an issue with a Savage BVSS in 223. I installed a EGW omoa base and Burris Signature Zee rings. I could not get her on paper . Shooting way left. I then installed the + & - 10 inserts in the front. Still way off. So i installed the + & - also in the back. This got me zeroed with 69SMK's and there is only 33 clicks left of right windage. With my 55 grain ballistic tip load i again run out of clicks. The scope is a Leupold var X III with the varmint hunters reticle 30mm tube. I took the rings off and turned them around 180 degrees per the Burris tech. I have a total of 20moa in the inserts and the complete windage adjustment used up. Im wondering if something could be wrong with my scope???? :-\ :-\

I suspect the problem is where the holes got drilled and tapped on the action. You could try mounting the scope upside down or sideways and that should tell you if the scope is the problem.