105 Hybrid lost cause in 6BR?

[expiper]

will check out the rifle and scope etc for anything obvious. I did scope the barrel and noticed these machining marks on the lands right at the end of the throat. Other than that, barrel looks good.

testing was at 100yds.View attachment 1324712View attachment 1324713

wow---i have lived a sheltered life---i have never seen a custom/aftermarket bbl that looked that ruff !!--is this a savage or budget item--if a bullet runs over that cheese shreder it is going to be streaking copper all the way down the bbl and the torn jacket will not allow the bullet to fly right (in my humble opinion )--I would not waste any more components on tht rototiller of a chamber --life is too short to spend time trying to make that disaster shoot--Roger

 

[VA_XTC_Shooter]

I sent photos and video to barrel maker to get their input.

 

[762willdo]

I had the same issue could not get the 109’s to shoot and the 105 hybrid shot mediocre, when I ordered the barrel I ordered 7.5. Long story short when I measured the twist it was a hair over 8, called the shop they said bring it back and they will put a new one on, they asked me to wait a month as they had just got a big order, in the mean time I tried a box of the 105 vlds and holy crap they shot lights out. I’m keeping the barrel now and ordered a bunch of the vlds,

 

[Kracken McGraw]

If you guys were building a straight 6BR to shoot the 105 bullets and 107 Sierra’s and 108 Berger’s would you choose the 7.5 twist over the 8 twist? I’m at 2650 elevation.

 

[Dgd6mm]

If you guys were building a straight 6BR to shoot the 105 bullets and 107 Sierra’s and 108 Berger’s would you choose the 7.5 twist over the 8 twist? I’m at 2650 elevation.

Yes, I would and did. It shoots very good. I did it just incase I decided to shoot something heavier. I'm sitting on about 6000 DTAC's.

 

[Bill Norris]

If you guys were building a straight 6BR to shoot the 105 bullets and 107 Sierra’s and 108 Berger’s would you choose the 7.5 twist over the 8 twist? I’m at 2650 elevation.

My 1 - 8 Tw. 6BRX shoots great but if I do another one I will go 1 -7.5 Tw.

 

[Kracken McGraw]

Thank you both! ^^^^^^

 

[mjl650]

Thank you both! ^^^^^^

Just picked up a 1:7.5 for my next 6br.

 

[VA_XTC_Shooter]

Seating depth appears to have worked.
Seated right at the lands shrunk the groups to under 1/2 moa. I can live with that

don’t think the barrel has an issue. Barrel maker offered to take it back. Told them I’d do seating depth test first. Also tried mag fed ammo (different bullet) and it shot really well.

 

[kindabitey]

If you guys were building a straight 6BR to shoot the 105 bullets and 107 Sierra’s and 108 Berger’s would you choose the 7.5 twist over the 8 twist? I’m at 2650 elevation.

All of my 6BR barrels have been/ are 1-7 twist. I'm of the "better too fast, than too slow twist" school of thought.

 

[coorslight]

My 6BR is just a simple Savage target action with a Shilen 28" 1-8 barrel in a savage f-class stock, I use 107 sierra 105 hybrid berger's and the 108 bergers with great success, Seated touching the lands with 30.0gr Varget for all loads. The gun shoots in the high 590's for 600 yard matches.