1 lighter bullet in a 6br/?

[Lone Hunter]

Just ran 3 powders through GRT.
SWP, N140, IMR4166

BC, Curious as to what the data was on the SWP. Would you care to share? I have a lot of it ( SWP ). I don’t have a computer just IPad and IPhone or I would do it.

 

[Bc'z]

BC, Curious as to what the data was on the SWP. Would you care to share? I have a lot of it ( SWP ). I don’t have a computer just IPad and IPhone or I would do it.

Precieved max is 32gr SWP @ 2.270 COAL....
Tread lightly and do a powder/preasure work up 1st to see what's going to work for your set up

Precieved max N140 32gr,
IMR4166 31.5

 

[Lone Hunter]

Precieved max is 32gr SWP @ 2.270 COAL....
Tread lightly and do a powder/preasure work up 1st to see what's going to work for your set up

Precieved max N140 32gr,
IMR4166 31.5

Thank You Sir…

 

[Bc'z]

I ran a seating test this morning at 100yd, too foggy to shoot @200.
Peterson brass cci400 30gr N140 80gr Dominator, no flags.
1.806 CBTO to start
1st 2 shots2nd 2 shots 1.803 CBTO
5 shots 1.803 CBTO 8 shots 1.803 CBTO I'm going to move to charge weight next i believe more fuel will tighten things up.
1.800 CBTO started to open up

 

[foxguy]

I ran a seating test this morning at 100yd, too foggy to shoot @200.
Peterson brass cci400 30gr N140 80gr Dominator, no flags.
1.806 CBTO to start
1st 2 shotsView attachment 16203022nd 2 shots 1.803 CBTO View attachment 1620304
5 shots 1.803 CBTO View attachment 16203078 shots 1.803 CBTO View attachment 1620306I'm going to move to charge weight next i believe more fuel will tighten things up.
1.800 CBTO started to open up

Nice Grp. Curious, Do you know how far off the lands / in the lands your bullet is?

 

[Bc'z]

Touch was 1st 2 shots .003 off for everything else.
I'll fine tune seating after I evaluate neck tension and charge, but for now I know it's shooting well enough to read what it's printing on paper.

 

[Dolomite]

I ran a seating test this morning at 100yd, too foggy to shoot @200.
Peterson brass cci400 30gr N140 80gr Dominator, no flags.
1.806 CBTO to start
1st 2 shotsView attachment 16203022nd 2 shots 1.803 CBTO View attachment 1620304
5 shots 1.803 CBTO View attachment 16203078 shots 1.803 CBTO View attachment 1620306I'm going to move to charge weight next i believe more fuel will tighten things up.
1.800 CBTO started to open up

Very nice!!!!! Did you get any velocity readings?

 

[Bc'z]

Very nice!!!!! Did you get any velocity readings?

No velocity report yet, let me address neck tension and charge 1st.

 

[Gabe22BR]

I ran a seating test this morning at 100yd, too foggy to shoot @200.
Peterson brass cci400 30gr N140 80gr Dominator, no flags.
1.806 CBTO to start
1st 2 shotsView attachment 16203022nd 2 shots 1.803 CBTO View attachment 1620304
5 shots 1.803 CBTO View attachment 16203078 shots 1.803 CBTO View attachment 1620306I'm going to move to charge weight next i believe more fuel will tighten things up.
1.800 CBTO started to open up

Put that thing up… quit playing with it !!!

 

[Bc'z]

Put that thing up… quit playing with it !!!

Now where's the fun in that??
I'm doing bushing test next, I wanna know if it's gonna like more tension before I stand on it.
If it looks good tomorrow I might just shoot it Saturday club match.

 

[Bc'z]

Put that thing up… quit playing with it !!!

Well now I think I need a tuner
I shot the velocity test 1st, 30gr load with .263 bushing and magnetospeed hanging it shot small.

Very nice!!!!! Did you get any velocity readings?

I shot 3 for ya
Cold clean bore 2974
2998
3002 2988 avg
I'm gonna step on the gas next and I'll get a more accurate report for ya in the end.

 

[NCVarhtr]

I can hardly wait>>>>>>>>>>>>>>>>>>>>>>>>>

 

[jackieschmidt]

Fir pure accuracy, none of the 80 or 90 grain bullets will stand with the Barts 80 grn Dominator. It’s a true custom Benchrest Bullet.

In my 6BRA, which has a .103 Freebore, I shoot the Barts 80 at 3450 fps with 33.7 grains of H4895, with great accuracy at 200 yards. I also have a load of 32.3 grains of N135 that shoots quite well. I shoot 1-12 twist Bartlien or Krieger barrels.

I am jumping them just a little, probably .010.

 

[Gabe22BR]

Looks club match ready…

Well now I think I need a tuner
I shot the velocity test 1st, 30gr load with .263 bushing and magnetospeed hanging it shot small.

Put an aluminum collar around it..w/ o-ring on each side to hold collar in place….

 

[Clancy]

This was this morning. 20” 10 twist Remington Varmint on my little hunting rifle with my new 2-16 z8i.

Dominators and N135. I found my seating depth between .004 and .008 off but it shot well to .012 off (wheeler method.) I’m using 205Ms. It’s averaged .270 for 5 shot groups for quite a while. Coyotes hate it.

Sorry about the bad pics. There’s water in my camera.

 

[SGT. Slaughter]

Fir pure accuracy, none of the 80 or 90 grain bullets will stand with the Barts 80 grn Dominator. It’s a true custom Benchrest Bullet.

In my 6BRA, which has a .103 Freebore, I shoot the Barts 80 at 3450 fps with 33.7 grains of H4895, with great accuracy at 200 yards. I also have a load of 32.3 grains of N135 that shoots quite well. I shoot 1-12 twist Bartlien or Krieger barrels.

I am jumping them just a little, probably .010.

Is the Bart's 80 grain Dominator a boattail or a flat base bullet?

 

[foxguy]

Bart's 80 Gr Dominator, Great Bullets, just not any available right now.

 

[Bc'z]

This mornings 1st 3 shots

 

[jackieschmidt]

Is the Bart's 80 grain Dominator a boattail or a flat base bullet?

BT

 

[SGT. Slaughter]

BT

Thank you Sir!