reloading

  1. *Dillon Dilemma!* Advise and suggestions please!

    I shoot USPSA and 3-gun matches religiously, and I’m looking to reload bulk 9mm and then add in .223 sometime in the future. I plan to deprime with a Frankford arsenal hand de primer, wet tumble with stainless pins, then load in the Dillion 550. I have access to everything I need to pour and...

  2. Load Variation in a Dillon

    I've discussed the variation of loads in a Dillon with a couple friends lately. That got me to wondering about testing just how much mine vary. Then in perfect timing, one of the articles in Dillon Precision's latest catalog was explaining a test they performed on comparing powder charge...
  3. PopCharlie

    How I spent my quarantine vacation

    Ok y'all, what are we doing in our reloading rooms during the quarantine?

  4. SELLING Caliper Bases - $22.00 Shipped

    Updated - 12.31.2024 - Current time from purchase to received - 3-4 days. Ensures consistent and repeatable measurements during the bullet seating process. See forum comments, reviews and feedback. PM me for additional information. 6061 Aluminum - Hard Anodized Black. Use in conjunction with...
  5. Shooter13

    Hornadys new Measurement Station

    Thought this looked pretty interesting, weight is 8 pounds and has leveling feet. Just thought it looked interesting for comparing ogive, headspace location and bullet to ogive location. Anyone seen one?

  6. New to Giraud, have question...

    So I am new to giraud, have a few quick yes or no questions. 1. Feel slight, slight, slight burrs when done. Is it acceptable to give a quick wipe with some fine steel wool to smooth out case mouth? 2. If I rotate a trimmed case on calipers, it varies by .0005, I assume that is more...

  7. Is ultrasonic cleaner the way to go?

    I currently use a traditional tumbler. But it seems the rotary tumblers and ultrasonic do a much better job. Not cleaning large volumes or brass. May be 100 lapua cases at a time after a BR match. Any advise? I like the idea of it not taking 3 hours and having to deal with all the...

  8. Bruno's has J4 jackets. Ready to ship!

    Shipment just arrived at Bruno's of J4 jackets. Following are in stock: 6mm - .243 Diameter - 0.825 Length 30 Caliber - .308 Diameter - 0.925 Length 30 Caliber - .308 Diameter - 1.000 Length 6mm - .243 Diameter - 0.790 Length Ready for shipment...

  9. The Precision Riflesmith - Mike Bryant Documentary

    This isn't a compeition post, but it's a film about a competitor, so wanted to share this film I did about Mike Bryant, called The Precision Riflesmith. If you use Google chrome, you can watch it in 4k. It's had 10,000 views so far on Facebook. I'm an actor/writer/director from Canada and...

  10. 300 PRC Load

    I am new to reloading and would like some advice on what powder and primers to start with. I will be trying the 200 and 212 grain ELD-X bullets. My main objective will be hunting but would also like to start shooting some long range (1000 yrd) targets. I have reviewed the load data from...
  11. Shooter13

    Brownells has $.01 hazmat fee and free shipping on $150

    Today only, just thought I'd pass this on.
  12. Shooter13

    Let's talk case prep

    Full length resizing case prep Discussion: How I do it. First after returning from the range I check the head spacing, after that I will lube and full length resize and de-prime in one step. Second, after I have resized I chamfer the mouth and neck then get the lube off by tumbling in media...

  13. Bob Green comparator review

    Just got it in the other day. Sorted about 150, 6.5 Berger’s Gotta say. Very impressed. Even with Berger’s, there was a pretty substantial range of .002 And I had about 3 that were wildly off. Very misshaped. Took several readings and the bullets were off .010 from one side to the...

  14. Bto. Beating dead horse

    I know I’m beating a very dead decaying horse. Measuring bto. I only want to know ONE thing. I have heard the bearing length arguments, the weight arguments. My one and only question is, I have had Berger’s that varied in bto length by up to .004. Not common, but they did. So I know...

  15. Powder charge, winter vs summer nodes?

    I don’t do much cold weather shooting. Last summer my accurate node was 40.5, about 80-85 degrees, probably humid. Yesterday it was 50 and cloudy. I noticed I was at 42.5gr can it really change by 2 grains due to temp? The only other change I made was from Hornady to lapua brass...

  16. Adams trickler (static) problem? Maybe?

    So I went to do some reloads the other day. Loaded up the auto trickler and my powder drop. And after dumping the powder, the trickler started up to trickler the remainder. But even tho loaded with powder, the motor kept turning and turning. So I emptied it, blew down the tube, shined a...

  17. Which light small press for range reloading?

    I have been up in the air asking around. But wanted to get a general consensus. What is a good press for full length sizing at the range. I really want something smaller and lighter. As of right now, the only thing I can think of is the harrels compact and the rcbs partner. I wish I...

  18. Bullet seating variations for fclass or BR, whats acceptable?

    So I use a Wilson inline seating die with a hydro press. For what ever reason, I never checked my variations round to round for consistency. Don’t know why. But I got a Redding instant indicator in the mail (always wanted one) and so I measured 20 rounds for seating depth. The seating...

  19. Montour county rifles melplate uniformer review?

    Looking for reviews on the montour county Rifles melplat uniformer. I currently have the Hoover, But that little copper shard in the hollow point after trimming drives me bonkers, I would think that could deflect wind as well. Feels like it defeats the point of trimming. I see that...

  20. Bullet pointing/trimming based on bullet length?

    I pre-apologize for this question. I know opinions will vary and also, because I ask a lot of bullet measuring questions. Buuttttt. , in the recesses I’d my mind a thought hit me about tipping or trimming bullets. If the lengths are not the same, they will trim or tip differently...

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
164,690
Messages
2,182,347
Members
78,464
Latest member
Speedy7722

Share This Page

Back
Top