reloading

  1. IMR 7383 useful?

    Hey guys Gibrass has some IMR 7383 in stock for about $10 a pound. I’d like to get some to try out. He states to use IMR 4831 data and reduce by 15% to start. I’d just like it to play around with some surplus calibers mostly 7.62x54R and 8x57 and the 6.5 Carcano and maybe just maybe my 25-06...

  2. Shoulder bump question

    Hello, I've only been reloading for about a year and have a question in terms of some once fired brass I picked up at the range. I noticed that someone left a pile of brass (223) at the range so I decided to pick it up, take it home, inspect, clean etc Since this wasn't fired from my rifle, I...

  3. Newbie 308 reloader need help first time!

    Brand new Remington 700 sps 308 with new 24inch xcaliber barrel getting installed by gunsmith 1-10 twist along with a can when it comes in lol Getting into the long range game this year and decided to get into long range shooting with my friends as a hobby. So ive been doing a lot of research...

  4. Reloading Components IN STOCK - POWDER PRIMERS @ Brunos

    Hey guys! Just a friendly reminder we just added powder and primers to our site, along with Sierra, Berger & Hornady bullets at low low prices. Please note - we have to ship in case lots at the moment - it saves on shipping and hazmat fees; and we are so low staffed we don't have the ability to...

  5. Primer for 9mm

    I was wondering if my gun will be safe. Started loading some 9mm the other day and when I got my brass tumbled I went right into sizing and priming not thinking what primer was called for in my recipe. The recipe as is, Twist: 1:10.000" Barrel Length: 4.000" Trim Length: 0.750" BULLET WEIGHT...

  6. 300 savage bullets seating deep.

    Howdy folks, I’ve shot some of my 300 savage reloads and accuracy kinda sucked, I’ll have to tune things in a bit. my question is is there such a thing as seating a bullet to deep? The 300 savage has a super short neck and I’m limited to an oal of 2.600 I’m shooting a Remington 81. My bullets...

  7. Cast Bullet Loads 8mm Mauser

    Howdy, I have a Steyr M95M I’d like to get load some cast bullets for. They are 180gr coated and gas checked. I’d like to propel them with IMR 4227. Trusty Lyman 45th edition says to load 20gr for a 168gr cast bullet. Would dropping 1gr for my heavier bullets work? I’ve done something similar...

  8. Just Loaded My First Black Powder Cartridges

    just loaded up some 10.4x42 aka 41 Swiss. I would like to have some of y’all check my work to make sure I did it right. so I measured 52 gr. (Vol) of GOEX 2F, poured that into the case, placed a wad on top. Seated a 315 gr lead bullet to 2.2 in OAL, Then crimped. I’m going to add some BP lube...

  9. Black Powder Cartridges

    Howdy, my friend and I are going to fix up his Swiss Vetterli and get it converted to CF. We have shells, bullets (44 magnum lead) and dies on the way, 10.4x38. we want to load with black powder, however I’ve never used black powder and need some help. I have one pound of Pyrodex 2F that would...

  10. IMR 4895 Reduced Cast Loads

    I’ve been wanting to shoot some 140gr cast bullets out of my 6.5 Carcano however, the only powders my Lyman manual recommends are Unique and 2400 can’t find those anywhere for over a year. 6.5x54 a case so similar to the 6.5x52 that I can trim 2mm off the neck and it fits perfectly and has been...

  11. 7x57 Lead SP Touching Rifling

    New reloader here with probably a simple question. Started reloading some 7x57 with Remingtons old 175gr RNSP bullets. Lyman 45th manual says to seat at 3.065 seating there causes the lead SP to engage the rifling (but not the jacket) making the bolt a little harder to close. This made me...

  12. 6.5 Carcano OAL?

    Howdy folks I got a little question here about 6.5 Carcano OAL. I’m shooting a Hornady 160 gr .264 bullet seated at 2.980 behind 31 gr of IMR 4064. It chambered in 2 of my rifles just fine. So my reloading manuals vary a little bit with OAL. Lyman 45th says 2.900 with any bullet, for testing...

  13. Best 130-150gr bullet 6.5 CM for Precision Shooting?

    So I have successfully loaded up my first pounds worth of powder with imo great success. But I'm looking to try to tighten up my groups with my Tikka t3x in 6.5cm. I've got a couple dozen Hornady match BTHP remaining but would like to get some ideas on my next option to be on the lookout for...

  14. 6.5mm Creedmoor reloading -- greatest accuracy; questions

    Question: Seeking the most-accurate powder and bullet combination that people are finding, for the 6.5mm Creedmoor. Wanting to know what you 65CM reloaders have found through experience, despite what the loading guides do or don't say. Would like to take advantage of the high-BC abilities of...

  15. Best powder and availability for 6.5 creedmoor updated

    Hello to my fellow "Connoisseurs of the powder and lead"... Looking for an updated list of the best load data that a regular guy like me can find in-stock in this day and age for the 6.5 creed. Ideally I'm shooting 400-800 yds with a tikka t3x tac a1 in, you guessed it, 6.5 Creed. Any replies...

  16. 6.5 cm load too hot. what now?

    hi. i loaded what i thought was a ~min load for my 6.5 cm howa oryx. due to limited poweder options i was forced to.. research a bit to find a load that seemed to be correct for my powder. upon shooting, it seems it was not correct. Although the bang was arguably louder than usual, notbing...

  17. 3031 in .243?

    Hi all. I’m unable to purchase .243 factory ammo and unable where I’m at to purchase the correct powder for reloading my .243 shells. I use 80 grain Sierra boat tail soft points and mostly for hunting coyotes. The only powder I currently have on hand is IMR 3031 but I’ve heard that burns too...
  18. 6ShotsOr5?

    Powder Sentry

    I found this guarding my powder hopper today. Looks like he’s got everything under control for now, so I left him at his post.

  19. *DILLON DILEMMA* Version 2

    To all that replied to my earlier post, thank you so much. I’ve received excellent advice, and I am so glad that I posted here before purchasing anything. To recap, I shoot USPSA and 3 Gun, and I’m looking to load bulk 9mm now and add on .223 in the future. Per advice from the previous thread...

  20. *Dillon Dilemma!* Advise and suggestions please!

    I shoot USPSA and 3-gun matches religiously, and I’m looking to reload bulk 9mm and then add in .223 sometime in the future. I plan to deprime with a Frankford arsenal hand de primer, wet tumble with stainless pins, then load in the Dillion 550. I have access to everything I need to pour and...

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,578
Messages
2,199,224
Members
79,004
Latest member
4590 Shooter

Share This Page

Back
Top