prs

  1. Technical aspect of Adams trickler system?

    I was pondering getting the Adams system. I’m not total dummy (only partial), but not a brain surgeon either or a software engineer. So how hard is it to setup and maintain? And can it be glitchy? Just kind of want a easy operation system like my charge master.

  2. Pacific super mag, 3 ram press parts?

    So I picked up this press, because I loved it on first site and thought it was the coolest thing I ever saw. But I need a few parts for it. This press is a little before my time, but not everyone’s, hehe. So wondering if anybody on here may know where to get parts, or if anybody may...

  3. Bore Tech Cu+2 Vs sweets vs wipeout.

    Hey all, I was looking to experiment with a few copper removers. I know there is a wide range of opinions. I currently use wipe out accelerator, with wipe out foam. By morning, the foam dripping out of the end of the barrel is a beautiful nuclear radiation bright blue. It never...

  4. Does auto trickle only work with fx120i?

    I was just wondering if the auto trickle system only works with the 120i scale. I have a a&d Fx700ct, which is love and is always very accurate. Was also very expensive. Is there a way to adapt to a different scale, Or software/hardware setup will be an issue?

  5. Importance of different bullet lots??

    Is it ok to mix bullet lots if you are separating by weight and bbto??? Or is there another reason not to mix lots. Just curious.

  6. 21 century lathe turning question

    So I am somewhat new to turning. And I purchased a 21 century lathe. I am sure my question apples to any lathe tho. When I feed in the brass, it cuts the brass as expected. So if I pull the brass out and send it back in, without adjusting anything, it take off more, than again, takes...

  7. Are spotting scopes necessary for benchrest?

    I was just wondering, Are spotting scopes necessary for benchrest shooting? Especially when the rifle scopes usually zoom to 60x??

  8. 300blk reload data confusion

    So just starting to reload for pistol length, 1:8 300 blkout. I have Sierra 220 smk and h110 powder. Question is if you look at the 2 uploaded images, one is Hodgdon’s, and one is Sierra. H says 9.2gr is the max load, while Sierra says 10.1-12.2. So I cannot say I’m not confused.

  9. Labradar vs Magnospeed v3

    Before I make the purchase, I was wondering if there is any significant difference between the labradar and the magnospeed v3. Saving 200. wound be nice, but want what’s best and willing to pay more to have what’s right first time around. Looking at reviews, I don’t see a much of a...

  10. Local/ group PRS style matches

    I decided I'd try my hand at my very first PRS match. Closest one is in NH (im in upstate NY- Adirondacks). Went to register today and they are sold out. Anybody know if there are any local/ group matches somewhat close by?

  11. Long Range Accuracy still in business?

    Does anybody know if LRA is still in business? Can’t find their website and are out of stock everywhere. Just curious

  12. Bullet comparators compared?? Reviews please

    So my reloading ocd is now in the market for a comparator. I have noticed the plain and simple ones, which I have. It’s ok. So I have noticed a few that have got my attention. First I saw the Darrell Holland gold standard comparator that kind of has the setup like a Wilson trimmer...

  13. Whidden bushings fit Wilson die?

    Will Whidden bushings fit Wilson neck sizing die for arbor press?

  14. 21 century #br driver vs #4 driver, help please

    If anybody has both, can someone tell me the difference. I tried calling 21 century, but they must be busy or closed for holidays? I want to order case holder and driver for 6.5cm lapua brass. He has it listed as #br driver and not #4 driver, which is srp driver. But the lapua brass...

  15. 6.5cm- 130gn vs 140gn bullets

    This should be a short thread. Which is a better choice for PRS competitions and why? Running with Berger 140’s now but it’s a pretty mild load 39.0 grains of H4350 getting around 2500fps. What do you like your velocity to be at?

  16. Loads for 123gn Amax in .260Rem

    Hi everyone I’m looking use up some 123gn Amax projectiles I have lying around in my .260Rem for a PSR style comp, which is only going out to 600yrds Max. I also want to use up some varget (Australian AR2208). Does anyone have a good load on hand using Varget with this weight and type of...

  17. Tips for a first time PRS shooter

    Like the title says do you have any tips/tricks/ training methods that would be valuable to a new competitor. Any input is much appreciated!
  18. 6ShotsOr5?

    Show Your PRS .22LR Rigs

    .22LR PRS matches seem to be catching on. If any of you are shooting these matches, I’m curious what actions, chassis, barrels, mounts, and scopes you are running. Also, what range are you zeroing your scope? Our club matches have some targets at 25 yds which seems really close for a zero...

  19. 6 Dasher 1:7 - 115 dtach - what powder?

    What powder are you guys using with the dtac's? I have some Varget and RL15 to use, wondering if something slower might work better with these heavier bullets.
  20. 6ShotsOr5?

    PRS Brakes & Suppressors

    What muzzle devices are AccurateShooter PRS shooters using? The last poll I could find on this is pretty old, from the Precision Rifle Blog in December 2015. After reading recently about the effect of concussion from muzzle brakes, I’m planning to buy — or should I say make a long-term deposit...

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,890
Messages
2,205,753
Members
79,196
Latest member
pkitrinos01

Share This Page

Back
Top