prs

  1. Barrel life of a 223 Kreiger - 1:7.7 match barrel

    Just wondering what the barrel life is for a 223 rem ss Kreiger 1:7.7 twist barrel. I have one in my ar. Was considering if it is worth getting custom dies made seeing I have about 800rds down it. It has a cle chamber which is the other reason I was considering custom dies. Cle chamber...
  2. My new Hood vs my Forster

    So not long ago I posted questions on my Forster coax not giving me consistent head space. I tried everything and it would vary .0005-.002 cartridge to cartridge. My only guess is the floating die?? Tried to figure everything, lube build up, bad annealing, etc.... Anyway, I picked...
  3. Forum Boss

    6mm BRA for PRS -- Great out of the Gate

    This rifle belongs to Shane Sivertsen (aka SoDakDasher in our Forum). It features a Lone Peak Fuzion Action with Trigger Tech Diamond trigger (flat shoe). Up front is a Benchmark 26” MTU barrel chambered in 6mm BRA (a 40-degree 6mmBR Improved “BR Ackley”). It’s all nestled into a McMillan A5...
  4. Interesting eBay find, a partial prometheus for parts

    Saw one for parts on eBay if anybody looking. Seems pretty cheap. Don’t know much about them tho https://www.ebay.com/itm/Prometheus-Gen-1-Powder-Measure-Trickler-/293140941128?nav=SEARCH
  5. Lee pro 1000 decent budget press?

    I was wondering for reviews on the lee pro 1000 progressive press. I am fully aware you get what you pay for, but sometimes certain items are a deal. I just want something to load 300blk for fun at the range. And I don’t want to spend a fortune. So I am wondering what people’s...
  6. Pma micro die adjuster reviews?

    I was gonna make the title micro die adjuster vs shims, but I figured no comparison. So I will just ask how people like it and is there any comparable items on the market? Dan
  7. Annie vs amp reviews?

    I don’t really want to compare Annie vs amp annealer. I know amps are top notch machines. But Annie’s look like they hold their weight as an inductive annealer that anneals down to the 1/10 of a second and are at a price that are on par with most good flame annealers. So do a lot of...
  8. Bob Green comparator review

    Just got it in the other day. Sorted about 150, 6.5 Berger’s Gotta say. Very impressed. Even with Berger’s, there was a pretty substantial range of .002 And I had about 3 that were wildly off. Very misshaped. Took several readings and the bullets were off .010 from one side to the...
  9. Bto. Beating dead horse

    I know I’m beating a very dead decaying horse. Measuring bto. I only want to know ONE thing. I have heard the bearing length arguments, the weight arguments. My one and only question is, I have had Berger’s that varied in bto length by up to .004. Not common, but they did. So I know...
  10. Powder charge, winter vs summer nodes?

    I don’t do much cold weather shooting. Last summer my accurate node was 40.5, about 80-85 degrees, probably humid. Yesterday it was 50 and cloudy. I noticed I was at 42.5gr can it really change by 2 grains due to temp? The only other change I made was from Hornady to lapua brass...
  11. 6mm BR vs 6mm Creedmoor

    Hello shooters, I am considering a new rifle build and have heard great things about both the 6mm br and the 6mm Creedmoor. This will primarliy be for PRS, CMP, and similar type matches though I might also like to use it for some varmint shooting. To me, it seems like the 6mm Creedmoor is...
  12. Which light small press for range reloading?

    I have been up in the air asking around. But wanted to get a general consensus. What is a good press for full length sizing at the range. I really want something smaller and lighter. As of right now, the only thing I can think of is the harrels compact and the rcbs partner. I wish I...
  13. Bullet seating variations for fclass or BR, whats acceptable?

    So I use a Wilson inline seating die with a hydro press. For what ever reason, I never checked my variations round to round for consistency. Don’t know why. But I got a Redding instant indicator in the mail (always wanted one) and so I measured 20 rounds for seating depth. The seating...
  14. Montour county rifles melplate uniformer review?

    Looking for reviews on the montour county Rifles melplat uniformer. I currently have the Hoover, But that little copper shard in the hollow point after trimming drives me bonkers, I would think that could deflect wind as well. Feels like it defeats the point of trimming. I see that...
  15. Where to find a lighter ejector spring?

    Was wondering where to find a lighter ejector spring for a Rpr bolt. At the moment I removed the ejector not to ruin my brass, but was hoping there was a resource to get a lighter spring so the brass will just turn out and remove by hand instead of it flying across the cement?
  16. Bullet pointing/trimming based on bullet length?

    I pre-apologize for this question. I know opinions will vary and also, because I ask a lot of bullet measuring questions. Buuttttt. , in the recesses I’d my mind a thought hit me about tipping or trimming bullets. If the lengths are not the same, they will trim or tip differently...
  17. How to use JB bore paste and Kroil correctly?

    I know they sell a kit with both included. And I also hear a lot of people on here using that combo for tough deposits. Do you only use the JB/kroil when the barrel is new?? Or once and a while down the road for deep cleanings? Or every time? I only ask because I always hear the joke...
  18. Will hydro press with neck die work?

    Will my Wilson neck die work on my 21 century hydro press?
  19. Labradar for 475. Today till 7pm pst (ebay)

    This should work. Has to be done on the ebay app. Not website. Add labradar to cart and click add coupon. “PSAVETODAY”. Says 15% off up to 100 dollars. It says it will work. With coupon it will be @475. Good luck. For today only till 7pm pacific time I believe
  20. VGA felt cleaning pellets?

    Do we like vga felt cleaning pellets?? And/or do we like using a little oversized for cleaning carbon ring? They are not cheap so I want to see if they are worth buying

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,912
Messages
2,206,215
Members
79,217
Latest member
NF1E
Back
Top