hornady

  1. Flatter than calculated trajectory

    Hi everyone, I'm hoping that someone here is able to help me with a bullet drop related question I have recently come across. I've been a long time lurker here on Accurate Shooter, but finally decided it was time I got an account when I couldn't answer this one. Any thoughts/advice is greatly...
    • 17Hornet
    • Thread
    • 22 creedmoor ballistic coefficient creedmoor drop hornady jbm long range updraft
    • Replies: 62
    • Forum: Main Message Board

  2. 300 Win Mag w/ Hornady 165 SST

    I am trying to build a load for my 300 WM using Hornady 165 SST. I am running 2900 FPS with 70.4 gr of ACC 4350 with no signs of overpressure (not even close). Book max is 69.7 gr.. I am fairly new to reloading and I am not sure how much further I can go past book max with this powder. The gun...

  3. Neck bushing issue

    Hi there, I have just started using the hornady match grade bushing full length die. I have noticed that the bushing isn't re shaping the whole neck... it leaves about 1mm away from the shoulders... what is wrong? Thanks James

  4. Bullet seat too deep. Do Hornady bullet puller or RCBS fits on Lee precision press?

    Hi everyone, Sorry for my english cause my main language is French i am living in Crazy Québec city. hehe I am a new reloader so today was my first day. I checked every setting on the press followed instruction BUT. When i measured the OL i was at 2.45-2.5 on 30-30, suppost to be like 2.550. So...

  5. Hornady neck turn tool

    Has anybody used this tool? If so how do you like it? Pro''s and cons

  6. 22 grendel, 224 grendel, 22 lbc

    I have an upper being built by bart at baldwin gun works chambered in 22 grendel, will be a 22" with a +2" gas set up. Looking to run the 75 eld at 3150 to 3200 or the 80 eld at around 3100. I plan to use the hornady 6.5 grendel brass necked down with redding bushing s type dies using a few...

  7. Win Mag 300 Hornady Factory Ammo

    What factory ammo would you recommend for a 300 Win Mag. Interested in Long Distance Shooting. I have had great success with Hornady ELD Match in my 6.5 Most importantly what bullet size (grains) is best for long distance shooting (1500 to 1 mi)? Hornady makes a 300 Win Mag ELD Match in 178...

  8. 260 Rem with HDY ELD-M 147gr

    I got a new rifle in 260 Rem., it's Barnard action with 32" bbl. Anyone tried 260R with ELD-M 147gr. powered by H4831SC? Any (good) experience is appreciated. Thx.

  9. Neck Tension Issue

    Hello, I'm pretty new to reloading. I've gone through loading my first 100 rounds no problem(all new brass), but once I had to start resizing fired brass I've run into an issue. It would seem that my necks aren't getting resized enough or possibly at all. I'm using the basic hornady dies for...

  10. Dillon 550C vs. Hornady Lock & Load AP

    I have a Dillon RL 550B and looking to add another machine. Currently the local dealer has the Hornady Lock & Load AP on sale for $399. It looks stronger than the Dillon. What is everyone's idea as to plus or minus on either machine. I've had some issues with my Dillon 550 on large primers...

  11. A few questions...

    Good morning, everyone. I have a few questions pertaining to reloading for my WOA Varmint 223. I think I know the answer to the first two, but can't find the answer to the last one for the life of me. Any help is much appreciated. 1) I have some once fired brass from Mil-Spec (or close to it)...

  12. Hornady ELD-X and Hornady ELD Match for sale

    Hornady ELD Match bullets in stock

  13. Looking For 338 RUM Load Data

    Been playing around with my 338 RUM for several months now loading up 300 Elite Hunting Hybrids, but am having too much inconsistency at extended ranges. I am about to switch over to the 285 Hornadys and was curious if anyone has some load data for anything 250gr - 300gr? I will be using...

  14. Hornady 55gr FMJ-BT 6,000 count case: $398.95

    We have a special sale on the factory case, limited supplies. Hornady #: 2267B http://www.monmouthreloading.com/shop/hornady-55-fmj-bullets/

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,829
Messages
2,204,064
Members
79,148
Latest member
tsteinmetz

Share This Page

Back
Top