Ingenuity sightings?

[LRTom]

Well well, finally mine came.
Now I've got to find out how to set up my Sartorius entris 1.
I've got allot set from the directions for the II that are in the book.
My controller is blinking "low" check scale.
I put the cup on witch is higher than the set charge and it keeps blinking "low"

Someone is using the S,E1. I need your help.

When did you pay for it?
I’m waiting for shipment paid last week

 

[muleystalker]

Got a text today from USPS, mine should be here tomorrow.

 

[JMayo]

When did you pay for it?
I’m waiting for shipment paid last week

A month ago. I screwed up my order so it kinda got bumped around.
I bugged him too much. I'm just glad he didn't skip me more.

 

[shoot4fun]

A month ago. I screwed up my order so it kinda got bumped around.
I bugged him too much. I'm just glad he didn't skip me more.

I was in the same boat as you!
I can't tell you how many times I emailed Paul asking questions and discussing altering my order since my order was placed December 20, 2023.
But in the end he took care of me and was patient through it all.

 

[AGSHOOTER]

Any Idea what order # he’s up to?

 

[JMayo]

Well I'm up and running.
A bit of tweeking and the system is dropping within a kernal of vv130.

I emailed asking for instructions for S,E1.
Paul tried to call me, ( i had my phone in a no signal place.) I sure didn't expect such a quick response.
FClass John went the extra mile and sent me a quick rundown of settings In a pm.

I swear the way the old Sartorius scales did their set up options take a damn phd to follow.
But i made it.
The 3rd digit is a problem. The slightest air movement and it changes.
I'll get it off and the scale will settle better.

Sartorius entris 1s
1.1.2.2 setup >balance>app.filt>FILLING

1.1.7.11 setup>balance>wt unit>GRAINS

1.1.8.1 setup>balance>disp.dig>ALL

2.1.2.8 device>rs-232>baud>19200

2.1.3.5 device>rs-232>parity>NONE

2.1.5.3 device>rs-232>handshk>NONE

2.1.6.2 device>rs-232>databit>8 BITS

2.2.2.8 device>usb>baud>19200

2.2.3.5 device>usb>parity>NONE

2.2.5.3 device>usb>handshk>NONE

2.2.6.2 device>usb>databit>8 BITS

3.1.1.4 dataout>com.sbi>com.outp>AUTOW/O

3.1.4.1 dataout>com.sbi>format>16CHARS

3.2.2.2 dataout>prnt.par>format>22CHARS

 

[LRTom]

Is Paul sending out notices when he ships?

 

[muleystalker]

Is Paul sending out notices when he ships?

Yes he sent out a tracking #. I think it may have been a text, if not I must have deleted the email.

On another note, Paul did a great job on these, they are built like a tank, an elegant tank though,LOL This thing will last forever. Think if AREA 419 designed and built their own powder trickler system, this thing is a work of art. Can't wait to hook it up and run it. Well worth the wait. Great job Paul.

 

[jxb]

Is Paul sending out notices when he ships?

You'll get an email with subject "Your order has been shipped!"
it's via "tracking_at_shipstation . com" not his domain.

 

[J.d. Popkes]

27492 cmon !!!!!

 

[J.d. Popkes]

Any Idea what order # he’s up to?

I second this

 

[Chaotik]

I second this

I know he was past 27214 last weekend.

 

[JMayo]

I've had a chance to play with the ip system. I have to say I'm impressed.
I'm using the disk that came with it & v 130. 35.2 using 2 cups. I'm still learning !
The trickler stuck at the end, learning what to do.
FClass John has a 705 disk coming to me.
It's outstanding the way shooters help each other !
I made a video.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[AGSHOOTER]

I've had a chance to play with the ip system. I have to say I'm impressed.
I'm using the disk that came with it & v 130. 35.2 using 2 cups. I'm still learning !
The trickler stuck at the end, learning what to do.
FClass John has a 705 disk coming to me.
It's outstanding the way shooters help each other !
I made a video.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

Forgive my question I don’t own a Sartorius scale but I am switching from an AnD to it I do have one on order with the ingenuity system Do you have to zero it on every drop?

 

[quest450]

had the same observation but I think the two cups being used are not the same weight therefore he's zeroing the scale, that would drive me nutz

 

[AGSHOOTER]

had the same observation but I think the two cups being used are not the same weight therefore he's zeroing the scale, that would drive me nutz

That makes sense Ty

 

[JMayo]

had the same observation but I think the two cups being used are not the same weight therefore he's zeroing the scale, that would drive me nutz

Correct they are .01 or so off. But I'll tell you. Just waving your hand by the Sartorius makes the#'s run. I had to get the decimal point down to two because I couldn't keep that third still enough for the thing to come on. Very sensitive scales. Just punching the tear button causes it to move.
I just did 70 and I'm tired as heck !
I was also over tapping. I was watching the scale not the tube.

 

[quest450]

Correct they are .01 or so off. But I'll tell you. Just waving your hand by the Sartorius makes the#'s run. I had to get the decimal point down to two because I couldn't keep that third still enough for the thing to come on. Very sensitive scales. Just punching the tear button causes it to move.
I just did 70 and I'm tired as heck !
I was also over tapping. I was watching the scale not the tube.

I just got the new Sartorius with IP system about a month ago, I like the 3rd decimal in weighing powder and primers and there's a setting for ambient condition, I set my scale to "stable" instead very stable and it does help a little, I still have to close the IP wind screen when my AC kicks on.

add: you might wanna get the granite block and sorbothane absorbtion mat to stabilize the scale.

 

[quest450]

 

[JMayo]

I just got the new Sartorius with IP system about a month ago, I like the 3rd decimal in weighing powder and primers and there's a setting for ambient condition, I set my scale to "stable" instead very stable and it does help a little, I still have to close the IP wind screen when my AC kicks on.

add: you might wanna get the granite block and sorbothane absorbtion mat to stabilize the scale.

Lol, i got it now !
I got one but couldn't figure it out
My scale is the old one.