Roll Sizer for Rent ?

[YoteChaser]

I'm looking to see if anyone rents a universal roll sizer ?
I have about 200 Lapua 6BR cases the web is at .470 needs to be .4685
and none of my 3 full length dies will fix the issue ...
Thanks

 

[joshb]

Have you tried a 308 small base die? Pardon my bad memory if I’m wrong but I think it takes it down that much.

 

[YoteChaser]

Have you tried a 308 small base die? Pardon my bad memory if I’m wrong but I think it takes it down that much.

I have not but at this point I'm willing to try anything ...
Thanks Josh

 

[Fire Dog]

I have not but at this point I'm willing to try anything ...
Thanks Josh

I believe that a 45ACP carbide sizing die has also been a recommended fix to try…
Apparently it allows the case to be inserted completely through the die and thus sizes the “200” line that normal dies just cannot touch… Even the “Small Base” ones.
Saying that, if you can find a rollsizer that would be the way to go and it is a “Take a seat and wait” fix as they are incredibly quick to do their job and you don’t have to lube cases and then clean… I offer the service along with my clean & anneal {AMP} service but I suspect that you are a bit out of range for me to help you….

 

[Tommie]

Would a 6XC die work?

 

[YoteChaser]

Would a 6XC die work?

Don't know but some great ideas coming in ... Thanks

 

[Murray Brook]

Your chamber must be fairly tight. I have one of the 45 ACP set-ups. they work good only they will not take the web to .4685 or at least mine will not.

 

[YoteChaser]

Your chamber must be fairly tight. I have one of the 45 ACP set-ups. they work good only they will not take the web to .4685 or at least mine will not.

Correct I beginning to think I need to fix the chamber IT is tight .4705 web will chamber but will not eject without a high impact persuasion devise (Hammer) and some light tapping on the bolt handle.

 

[BarnDweller]

I have a roll sizer but not wanting to ship it. If you send me a couple pieces of brass I would roll size them and return them to you. If they were what you wanted you could send me the rest of them. I don't want anything you just pay the shipping. I only purchased it a year or so ago so I am not super experienced with it, so far only needed it once.

 

[YoteChaser]

I have a roll sizer but not wanting to ship it. If you send me a couple pieces of brass I would roll size them and return them to you. If they were what you wanted you could send me the rest of them. I don't want anything you just pay the shipping. I only purchased it a year or so ago so I am not super experienced with it, so far only needed it once.

PM SENT

 

[Stumpy1]

Not positive this will work, but it's a cheap option (maybe).

LEE .45 ACP UNDERSIZED CARBIDE SIZING DIE

Lee Pistol UNDERSIZED Carbide Sizing Die Lee .45 ACP Carbide Full Length Sizing Die only. All Lee straight sided pistol dies have carbide sizers. The solid carbide insert is ground to a special contour that does not leave the belt mark on the case. No case lubricant is needed and will actually...

www.titanreloading.com

Supposed to be 0.003 undersized.

Frank

 

[ELR LVR]

I believe that a 45ACP carbide sizing die has also been a recommended fix to try…
Apparently it allows the case to be inserted completely through the die and thus sizes the “200” line that normal dies just cannot touch… Even the “Small Base” ones.
Saying that, if you can find a rollsizer that would be the way to go and it is a “Take a seat and wait” fix as they are incredibly quick to do their job and you don’t have to lube cases and then clean… I offer the service along with my clean & anneal {AMP} service but I suspect that you are a bit out of range for me to help you….

Yes a 45 ACP Die works

 

[Murray Brook]

Yes a 45 ACP Die works

As I posted earlier they work but will not take the base to .4685. At least the one I have will not.

 

[YoteChaser]

As I posted earlier they work but will not take the base to .4685. At least the one I have will not.

Tried it you are correct Murray .4710 was the size I came out with on 5 Pieces

 

[Murray Brook]

Tried it you are correct Murray .4710 was the size I came out with on 5 Pieces

Same as the #'s I get.

 

[60723]

The Cortina mandrel die will work

 

[BuffaloBill]

Not positive this will work, but it's a cheap option (maybe).

LEE .45 ACP UNDERSIZED CARBIDE SIZING DIE

Lee Pistol UNDERSIZED Carbide Sizing Die Lee .45 ACP Carbide Full Length Sizing Die only. All Lee straight sided pistol dies have carbide sizers. The solid carbide insert is ground to a special contour that does not leave the belt mark on the case. No case lubricant is needed and will actually...

www.titanreloading.com

Supposed to be 0.003 undersized.

Frank

That’s a heck of a buy!

 

[gmr4]

I believe the roll-sizing needs to be done every time you reload to keep the .200 line in check. That how we use one. The roll-sizer will pay for itself pretty quickly if you shoot a good amount.

 

[DLT]

I have not but at this point I'm willing to try anything ...
Thanks Josh

Is opening the chamber up at the rear an option ? @DaveTooley fixed my rifle right up

 

[YoteChaser]

Is opening the chamber up at the rear an option ? @DaveTooley fixed my rifle right up

Yes its a bolt gun