22 cal Rimfire tuner for Anschutz
- Thread starter farmer44
- Start date
Hi-NV Shooter
Gold $$ Contributor
let us know what you end up with , and how it worked out
ATS Clamp on Tuners
ATS Clamp On Competition Tuner
The new ATS Clamp on Tuner allows all the same great features of the current competition model but does not require you to modify your existing barrel or use your existing threads. The current model supports barrels from 1.03-1.05" in diameter One (1) set of shims available upon request for...
www.kineticsecuritysolutions.com
Hi-NV Shooter
Gold $$ Contributor
Interesting, have you used one for rimfire?ATS Clamp on Tuners
ATS Clamp On Competition Tuner
The new ATS Clamp on Tuner allows all the same great features of the current competition model but does not require you to modify your existing barrel or use your existing threads. The current model supports barrels from 1.03-1.05" in diameter One (1) set of shims available upon request for...www.kineticsecuritysolutions.com
Lee
Hi-NV Shooter
Gold $$ Contributor
Yes, if any rifle is capable, meaning it shoots well already, it will improve how it shoots with more consistency in timing the bullet's exit from the barrel.
Lee
TRSR8
Silver $$ Contributor
Anschutz bbls are nice, Custom match barrels are nicer.
About 99% of those wear tuners…should tell you everything you need to know.
dusterdave173
Silver $$ Contributor
I had Harrells bore one for an CZ MTR--I asked for a tad more room so it would go on and off easy without marring the barrel--It has worked like a Dream! Took about three boxes of ammo and an hour to find the magic setting--I have had it on and off many times--I have tested the best setting in lots of conditions so far --I am amazed at how the thing is working! So far ammo with similar speeds are reacting the same--they are nice round small groups. This particular MTR was not my best one out of the box but it shines with that tuner. The ordering and dealing with Harrells could not have been easier. I am thrilled with it.
My setting turned out to be 300 out on the nose--some fellow local shooters are reporting between 275 and 300 for the same rifle and set up.
It was pretty easy to set up I started all the way in and shot 3 shot groups going out 25 at a time until it knotted the groups --when it looked great I kept going until it opened up again--this was easy to see.
I went back to the promising zone and tested in smaller increments until I zeroed in on my number. It seemed too easy so I kept testing on different days and conditions--the 'happy " setting kept repeating excellent results. I then used some other ammo that was very close in chrono tested speed. It responded the same. I have since tested by moving it a click or few at a time--it is astonishing how just a few clicks can upset the results.
I am very happy with the Harrells--best $ I have spent lately --I don't know a thing about tuners and was thinking it would take lots of ammo and time to figure it out but have been very surprised at how simple it was.
My setting turned out to be 300 out on the nose--some fellow local shooters are reporting between 275 and 300 for the same rifle and set up.
It was pretty easy to set up I started all the way in and shot 3 shot groups going out 25 at a time until it knotted the groups --when it looked great I kept going until it opened up again--this was easy to see.
I went back to the promising zone and tested in smaller increments until I zeroed in on my number. It seemed too easy so I kept testing on different days and conditions--the 'happy " setting kept repeating excellent results. I then used some other ammo that was very close in chrono tested speed. It responded the same. I have since tested by moving it a click or few at a time--it is astonishing how just a few clicks can upset the results.
I am very happy with the Harrells--best $ I have spent lately --I don't know a thing about tuners and was thinking it would take lots of ammo and time to figure it out but have been very surprised at how simple it was.
Yes. I have two. One is mounted on a CZ547 with a .900 Lilja barrel and the other on my Desert Precision Gunworks CZ547 with a 1.2 Shilen barrel. Both were supplied with 3d printed spacers. You can see the black spacer in the muzzle view pic. Both work well as intended. Pics are CZ DPG.
Attachments
these appear to mount flush with the muzzle and all the weight is behind. no weight is ahead of the muzzle. am i seeing that correctly?
Yes
thanks. glad to hear it's working out for you. bit of a different strategy when compared to several of the others on the market.
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.