What part is this?

[oldgamer]

Is this to a case lubricator like a Lyman?

 

[Bill Norris]

Is this to a case lubricator like a Lyman?
View attachment 1717249

Looks to be some sort of press primer part.

 

[Keith Hansley in NC]

that is for priming using the press it was made for---possibly RCBS

 

[ELR LVR]

Is this to a case lubricator like a Lyman?
View attachment 1717249

Looks like the manual priming arm like on my Rockchucker
Most people pull them off and use a hand priming tool
---
On a Rockchucker, there is a cross pin hole where you can attach that part
insert primer by hand, one , at , a , time
then prime on the downstroke up through the bottom of the shellholder
---
it aint worth much since nobody uses it, i think it was inclued on some presses just to ensure a guy could at least prime if he didnt have all the tools yet

 

[oldgamer]

Looks like the manual priming arm like on my Rockchucker
Most people pull them off and use a hand priming tool
---
On a Rockchucker, there is a cross pin hole where you can attach that part
insert primer by hand ,one, at, a , time
then prime on the downstroke up through the bottom of the shellholder
---
it aint worth much since nobody uses it, i think it was inclued on some presses just to ensure a guy could at least prime if he didnt have all the tools yet

Thanks. I now know what to put it with. My dad had his organization in his head. Lol

 

[oldgamer]

Thanks. I now know what to put it with. My dad had his organization in his head. Lol

Bin number 6. My dad's organization

 

[chop house]

it aint worth much since nobody uses it, i think it was inclued on some presses just to ensure a guy could at least prime if he didnt have all the tools yet

Yes, this. I have more than a couple laying around.

 

[Fast14riot]

View attachment 1717259
Bin number 6. My dad's organization

I was going to say that is the Lee bin, but I see a green powder measure in there, lol!

 

[hoz53]

I was going to say that is the Lee bin, but I see a green powder measure in there, lol!

yeah i wondered if that is a lee priming arm and mabie thats why i havent seen one like it. it looks a little to good for that though and it doesnt look like a rcbs-redding or lyman that i have seen. someone on here would know wat it goes to.

 

[Fast14riot]

View attachment 1717259
Bin number 6. My dad's organization

Ok, so not an exclusively Lee bin. I spy with my little eyes a Pacific O frame press there in the bottom. Maybe check that press to see if the priming arm fits.

 

[Presscollector]

Oh, so many young folks don't remember.
That is a primer arm for the World Famous Herter's presses. Like all the Herter's line, Mr Herter liked things to be robust, and therefore the Best.

There's a nifty Ideal #5 powder measure in that tub along with an early Lyman 450 lube/sizer. And lurking at the very bottom is???

 

[Presscollector]

Examples of the three styles of primer arms Herter's used.






A Model 3 press with the primer arm, also fitted with the Herter's Turn-O-Matic turret press system.

 

[oldgamer]

Examples of the three styles of primer arms Herter's used.



View attachment 1717694


A Model 3 press with the primer arm, also fitted with the Herter's Turn-O-Matic turret press system.
View attachment 1717697

i found one