22 Talldog

[ASbobcat]

How are you Talldog reloaders pushing the shoulder back?

My Lapua 6BR brass is tough. Hard to imagine pushing that shoulder back .100.

Any tricks?

 

[ricco1949]

I've converted some 22-250s to near 6BR with a cutoff 22-250 die however I increased the neck diameter in the die.

It was tough but attainable. I believe the 22-250 route is also a talldog MO.

 

[Mulligan]

Redding forming dies.

CW

 

[Mulligan]

Call Accurate Arms and Ammo
Good Christian folks that provide an exemplary service. CW

 

[ASbobcat]

Redding forming dies.

CW

Thanks

Are you happy with the result?

If you had it to do over, would you still do the Talldog, or would you to a Walldog?

 

[ASbobcat]

Call Accurate Arms and Ammo
Good Christian folks that provide an exemplary service. View attachment 1696111CW

Thank you very much.

How much do these cost?

 

[Mulligan]

I have both a WalDog and TallDog, The WalDog I have had for several years and is easily the most accurate cartridge I have ever shot. I have been playing with the TallDog for a little over a year and with N135 or 8208xbr it is superbly accurate. If I had to start over again.......... tough choice for me personally.
I have pulled the PPC barrels off my comp rigs and this year have been shooting the two above cartridges.
Maybe, just maybe, I am weird????
CW

 

[gunsandgunsmithing]

A 220 Beggs puts you at about the same capacity as a WalDog...fwiw. It shoots great and it's super easy. A 6/22 Grendel or maybe an ARC would be very close to a TallDog but has a ppc base. Again, super easy. Nothing wrong with a waldog or talldog...just a lot of work and I'm not sure there is any gain from it.

 

[Mulligan]

Thank you very much.

How much do these cost?

I do not remember, give them a call.

Super good folks
CW

 

[ASbobcat]

I have both a WalDog and TallDog, The WalDog I have had for several years and is easily the most accurate cartridge I have ever shot. I have been playing with the TallDog for a little over a year and with N135 or 8208xbr it is superbly accurate. If I had to start over again.......... tough choice for me personally.
I have pulled the PPC barrels off my comp rigs and this year have been shooting the two above cartridges.
Maybe, just maybe, I am weird????
CW

Thanks

Let me rephrase the question.

Assuming both are equally accurate, which was less trouble to form?

What is the relative difference in case capacity?

Appreciate the info.

 

[boltfluter]

A Waldog case is very challenging to make. Which is putting it mildly. But, superbly accurate! The most accurate round I have ever had the pleasure of shooting. No experience with a Talldog.
Paul

 

[ASbobcat]

A Waldog case is very challenging to make. Which is putting it mildly. But, superbly accurate! The most accurate round I have ever had the pleasure of shooting. No experience with a Talldog.
Paul

Thanks Paul

Which "version" do you have, and what dies/method did you use to form brass?

Bob