What do you hate the most?

[rwj]

Trimming is definitely my least favorite part of reloading. Overall, I love my reloading time, I’d love it more though if I had a nice big picture window in front of me. My room is in the basement and I really like having natural light. Our previous house it was also in the basement but I had a small window above the bench. (My shooting range was about 100 yard walk from the basement door. I would give a lot to replace that. Now, range on the same property but a 15 minute drive from home…)

How much property do you own? A 15 minute drive to the range makes it sound like a lot. Can you sell some land to fund building a loading area that has windows?

 

[450BM]

How much property do you own? A 15 minute drive to the range makes it sound like a lot. Can you sell some land to fund building a loading area that has windows?

No, it’s family property that we moved away from because of a natural gas well pad that was built too close to us. Weak lease turned it into a nightmare….

The pad is still there, they never fracked it, just drilled a hole to tie up all the property in the unit. My range is now the access road they built so I’m getting something out of it.

 

[DJSBRS]

I hate liar's and their cause and effect on others. In addition, I hate Rim Fire shooters that won't pick up, clean up their brass from the bench area firing line! Most of all, I hate CANCER and the agony it causes.

DJ

 

[HandgunHTR]

I am in the "I hate trimming brass" group.

That is why most of the cartridges I shoot these days are "improved" variants.

 

[1K6BRA]

I hate rimfire and centerfire “flyers”

 

[Infrequent Shooter]

Infrequent -

Howdy !

At the last competition I participated in, the assigned me a bench located between 2
.300Win Mag shooters; using brakes. Their muzzle blast set my 1.5oz trigger off once, and made me pull the trigger when I didn’t intend to…. twice.

The concussive effects hurt, in my forehead-eyes-upper cheek bones area.


With regards,
357Mag

357, That was a brutal day.

 

[Krogen]

Hmm... "Hate" is such a strong word. While there are tasks I dislike, or even hate, they're just troublesome. Usually I can do something about them with a different technique or even paying someone to do them. I draw the line at hating people. It's a waste of my energy to hate someone. It eats away at my psyche. Really, there's nearly nothing that can be done to change them. Hating a person destroys one's well-being, so I just won't let myself go there. Sure, there's plenty about certain people and philosophies that I abhor. I pay attention to issues and act accordingly. You guys have discussed many of them above. Still, I refuse to hate. It bogs me down and gets me nowhere.

Just my 20 m$ . . . . Feel free to disagree! I won't hate you for it.

 

[357Mag]

Hmm... "Hate" is such a strong word. While there are tasks I dislike, or even hate, they're just troublesome. Usually I can do something about them with a different technique or even paying someone to do them. I draw the line at hating people. It's a waste of my energy to hate someone. It eats away at my psyche. Really, there's nearly nothing that can be done to change them. Hating a person destroys one's well-being, so I just won't let myself go there. Sure, there's plenty about certain people and philosophies that I abhor. I pay attention to issues and act accordingly. You guys have discussed many of them above. Still, I refuse to hate. It bogs me down and gets me nowhere.

Just my 20 m$ . . . . Feel free to disagree! I won't hate you for it.

Kroger -

Yes… I agree.

Let’s not be “ hatin’ “.
Love the sinner….not the sin.


With regards,
357Mag

 

[NF1E]

Whiners.

 

[jackieschmidt]

Dropping brass on the floor and having to bend over and picking it up

One of Issac Newtons’s forgotten Laws of Motion states that…….”if you drop a precision prepped piece of brass on a hard surface, it will always land at the precise angle to inflict the most damage”.

 

[AlNyhus]

One of Issac Newtons’s forgotten Laws of Motion states that…….”if you drop a precision prepped piece of brass on a hard surface, it will always land at the precise angle to inflict the most damage”.

Like buttered toast..always lands buttered side down.

 

[hogpatrol]

I hate deer ticks the most but all ticks fall under the dislike category.

 

[Charliemac]

I sure cuss a lot when I drop stuff while reloading. You know brass, bullets, tools etc. But I really hate it when I spill a tray of primers. And I really hate dropping a box of loaded ammo and the plastic box shatters and the shells go everywhere.

 

[Liven The Dream]

Older now wait times on Barrels and anything PTG.

 

[Cryhavoc]

Big Pharma & Auto Insurance commercials

 

[justinp61]

Trimming brass followed by deburring the end. If I'd know I'd have to trim my 22-250 brass I'd built it AI.

 

[brokeasajoke]

I'm with the trimming crowd. Getting rained on while mowing is up there too.

 

[450BM]

I'm with the trimming crowd. Getting rained on while mowing is up there too.

I’m not a fan of mowing wet or dry….

 

[charlie b]

I sure cuss a lot when I drop stuff while reloading. You know brass, bullets, tools etc. But I really hate it when I spill a tray of primers. And I really hate dropping a box of loaded ammo and the plastic box shatters and the shells go everywhere.

Especially if it is a box of loaded ammo made for a ladder test and they are all different loads.

 

[RabbitSlayer]

Chamfer cuz it hurts my hands.