What do you hate the most?

[ELR LVR]

Dropping brass on the floor and having to bend over and picking it up

Having some Forest Service yahoo come by and talk for a few minutes only to leave saying
"Have a good time, be sure to pick up your brass"
at an open BLM shooting area where 20 years of brass is scattered everywhere???
yeh right, is that some sort of in house joke?

 

[rwj]

Trimming is definitely my least favorite part of reloading. Overall, I love my reloading time, I’d love it more though if I had a nice big picture window in front of me. My room is in the basement and I really like having natural light. Our previous house it was also in the basement but I had a small window above the bench. (My shooting range was about 100 yard walk from the basement door. I would give a lot to replace that. Now, range on the same property but a 15 minute drive from home…)

How much property do you own? A 15 minute drive to the range makes it sound like a lot. Can you sell some land to fund building a loading area that has windows?

 

[450BM]

How much property do you own? A 15 minute drive to the range makes it sound like a lot. Can you sell some land to fund building a loading area that has windows?

No, it’s family property that we moved away from because of a natural gas well pad that was built too close to us. Weak lease turned it into a nightmare….

The pad is still there, they never fracked it, just drilled a hole to tie up all the property in the unit. My range is now the access road they built so I’m getting something out of it.

 

[DJSBRS]

I hate liar's and their cause and effect on others. In addition, I hate Rim Fire shooters that won't pick up, clean up their brass from the bench area firing line! Most of all, I hate CANCER and the agony it causes.

DJ

 

[HandgunHTR]

I am in the "I hate trimming brass" group.

That is why most of the cartridges I shoot these days are "improved" variants.

 

[1K6BRA]

I hate rimfire and centerfire “flyers”

 

[Infrequent Shooter]

Infrequent -

Howdy !

At the last competition I participated in, the assigned me a bench located between 2
.300Win Mag shooters; using brakes. Their muzzle blast set my 1.5oz trigger off once, and made me pull the trigger when I didn’t intend to…. twice.

The concussive effects hurt, in my forehead-eyes-upper cheek bones area.


With regards,
357Mag

357, That was a brutal day.

 

[Krogen]

Hmm... "Hate" is such a strong word. While there are tasks I dislike, or even hate, they're just troublesome. Usually I can do something about them with a different technique or even paying someone to do them. I draw the line at hating people. It's a waste of my energy to hate someone. It eats away at my psyche. Really, there's nearly nothing that can be done to change them. Hating a person destroys one's well-being, so I just won't let myself go there. Sure, there's plenty about certain people and philosophies that I abhor. I pay attention to issues and act accordingly. You guys have discussed many of them above. Still, I refuse to hate. It bogs me down and gets me nowhere.

Just my 20 m$ . . . . Feel free to disagree! I won't hate you for it.

 

[357Mag]

Hmm... "Hate" is such a strong word. While there are tasks I dislike, or even hate, they're just troublesome. Usually I can do something about them with a different technique or even paying someone to do them. I draw the line at hating people. It's a waste of my energy to hate someone. It eats away at my psyche. Really, there's nearly nothing that can be done to change them. Hating a person destroys one's well-being, so I just won't let myself go there. Sure, there's plenty about certain people and philosophies that I abhor. I pay attention to issues and act accordingly. You guys have discussed many of them above. Still, I refuse to hate. It bogs me down and gets me nowhere.

Just my 20 m$ . . . . Feel free to disagree! I won't hate you for it.

Kroger -

Yes… I agree.

Let’s not be “ hatin’ “.
Love the sinner….not the sin.


With regards,
357Mag

 

[NF1E]

Whiners.

 

[jackieschmidt]

Dropping brass on the floor and having to bend over and picking it up

One of Issac Newtons’s forgotten Laws of Motion states that…….”if you drop a precision prepped piece of brass on a hard surface, it will always land at the precise angle to inflict the most damage”.

 

[AlNyhus]

One of Issac Newtons’s forgotten Laws of Motion states that…….”if you drop a precision prepped piece of brass on a hard surface, it will always land at the precise angle to inflict the most damage”.

Like buttered toast..always lands buttered side down.

 

[hogpatrol]

I hate deer ticks the most but all ticks fall under the dislike category.

 

[Charliemac]

I sure cuss a lot when I drop stuff while reloading. You know brass, bullets, tools etc. But I really hate it when I spill a tray of primers. And I really hate dropping a box of loaded ammo and the plastic box shatters and the shells go everywhere.

 

[Liven The Dream]

Older now wait times on Barrels and anything PTG.

 

[Cryhavoc]

Big Pharma & Auto Insurance commercials

 

[justinp61]

Trimming brass followed by deburring the end. If I'd know I'd have to trim my 22-250 brass I'd built it AI.

 

[brokeasajoke]

I'm with the trimming crowd. Getting rained on while mowing is up there too.

 

[450BM]

I'm with the trimming crowd. Getting rained on while mowing is up there too.

I’m not a fan of mowing wet or dry….

 

[charlie b]

I sure cuss a lot when I drop stuff while reloading. You know brass, bullets, tools etc. But I really hate it when I spill a tray of primers. And I really hate dropping a box of loaded ammo and the plastic box shatters and the shells go everywhere.

Especially if it is a box of loaded ammo made for a ladder test and they are all different loads.