rear bag movement

[dat]

I'm assuming you are a right handed shooter. Are you sure you are hitting it with your chest? Sitting directly behind it, it is easy to bump the bag with your chest.

I said directly, but am offset left a bit for shoulder alingment. I should have said shoulders perpendicular to rifle line

 

[dat]

I said directly, but am offset left a bit for shoulder alingment. I should have said shoulders perpendicular to rifle line

I believe the problem must be something I am doing/not doing because most people don't have the issue. Thanks to all for trying to help

 

[dat]

I switched to 8:00 ish and just catch the rifle lightly, it seems to help return to battery closer to the X.
You might also try having someone else shoot the rifle.

I believe the kick happens during recoil and not in returning to battery, but that brings up another possibility, thanks. Yes on someone else shooting, another good idea

 

[Owens85]

Try moving your self a little in a different position behind the rifle and see if it still happens. It may be hitting you in a weird way that's causing the rifle to kick slightly one way.

 

[dat]

Try moving your self a little in a different position behind the rifle and see it still happens. It may be hitting you in a weird way that's causing the rifle to kick slightly one way.

Thank you. Very good idea. I'm thinking when I get shooting again, I'll align on the target, move away from rifle, trip trigger, catch recoil with free hand, return to battery. If the crosshair aligns - I am causing the issue and will work from there to figure it out. If the bag kicks right, I'll be back!

 

[TonyinKY]

I’d verify bag is sitting perfectly flat. If not you’ll need this:

Dead Bottom

The Deadbottom will correct any bottom "bulge" that can develop on worn out bags. It also creates a flat surface to stabilize any bag and increases the overall height by 3/4". All Edgewood products are hand made. Please allow 3-4 weeks for delivery.

edgebag.com

 

[Link]

This is what I use on my bag. Works like baby powder, but a nicer can.----

 

[6BRA]

When I had a 6.5x47 shooting 130s at 2950...I saw torque.8 twist. I haven't seen this so much from the 6mm variety yet..Setting the rudder up takes hours of time with shims and movement. If you pull off for shims your left right needs adjusted again. Final results are worth effort You can draw the gun back 2 inches and the reticle never leaves center. Once shimmed correctly the hard part is over.

 

[JFrank]

My position and how I manage recoil makes a huge difference. I’ve only begun to use a rudder but I can say for certainty that some stocks are just not straight and maybe even a rudder won’t be able to correct a couple I’ve seen.
Jim

 

[quest450]

28" about .900 at muzzle. Ezell tuner

Ahh mystery solved

 

[quest450]

on a serious note, you might wanna replace the rudder with a 2" delrin rudder and get a matching 2" Protector bag for more stability.

 

[quest450]

 

[Shooter13]

I believe the problem must be something I am doing/not doing because most people don't have the issue. Thanks to all for trying to help

^^^^ This, I was getting ready to post about "it has to be you", please have someone video you shooting and I think you'll get a much better idea of what is going on, video for several shots, upload video to youtube.com and post the link here.

 

[Tod Hendricks]

In my case I resolved rear bag movement by adjusting the butt pad angle/height, height of rear bag and fine tuning my body/shoulder position. I surmised the movement was happening on recoil contact with my shoulder. I’m able to run a pretty light rear bag now compared to the 20lber that hid the problem.

 

[ridgeway]

Cut a footprint of bag out of toolbox liner. Lay your bag on top of that.

 

[dat]

In my case I resolved rear bag movement by adjusting the butt pad angle/height, height of rear bag and fine tuning my body/shoulder position. I surmised the movement was happening on recoil contact with my shoulder. I’m able to run a pretty light rear bag now compared to the 20lber that hid the problem.

More than likely what is going on with me. Thanks

 

[DHuffman]

More than likely what is going on with me. Thanks

Sent you a PM