My understanding is new direction is the 277 fury with 80K psi. But, the 80K psi requires a stainless steel case head - it's a two piece case.They seem to be pushing for that. I'm seeing quite a few showing up. 350/400 Legend, Bushmaster, 45-70/90/120; I realize a lot aren't new, but I'm seeing a lot more of these than I did before.
Ditto with the PRC chamberings, and the various re-necks of the Creedmoors.
Didn't the Army select the 6.8SPC as the new direction they're going? Or was that a(nother) flash in the pan?
I would buy one of them. I think it was originally called the 25 Redding or something similar. Will try to find the old Redding catalog it was in.25 Souper improved, 30 degree shoulder!
And a barrel life of 600....I'm working on the .21 Hogpatrol. It's a .257 Roberts AI necked down to .20. Shooting solids, looking to get 5000+ muzzle velocity. TOF to 500 yards, nanoseconds.
The 6.5 Creedmoor completely misses that audience and I have seen it used by no one because it “too comfortably” avoids the two relevant glass ceilings of bullet integrity and barrel walking from heat. The penalty for that ease on the shooter and equipment is that it drifts more in the wind. Whatever your wind skills happen to be, you’ll score higher if you up-chamber.
how many hogs do you think it will last?I'm working on the .21 Hogpatrol. It's a .257 Roberts AI necked down to .20. Shooting solids, looking to get 5000+ muzzle velocity. TOF to 500 yards, nanoseconds.
From the way things are going with the aging population, it will be something with no recoil or very little.If the criteria of greatest chambering means superior exterior ballistics in string fire shooting at 1,000, the cartridge necessarily exists already, under the constraints of barrels and bullets we have.
The 6.5 Creedmoor completely misses that audience, narrow but enthusiastic, and I have seen it used by no one yet because it “too comfortably” avoids the two relevant glass ceilings of bullet integrity and barrel walking from heat. The penalty for that ease on the shooter and equipment is that it drifts more in the wind. Whatever your wind skills happen to be, you’ll score higher scores if you up-chamber.
We don’t have bullets and rigs yet that can remain as accurate in the last 10 string shots for the bigger cartridges that exist. Possibly with unlimited weight.
One could assume that the challenge is to determine what works the “greatest” in the popular 1.25” tube free floated, flat fore end stock at 10kg. There probably is some “greatest” cartridge, that varies on a sliding scale that is proportional to the body mass and tolerance of the shooter. So it still isn’t “just one greatest”.
Another question is when does the cartridge get so big that vibration inaccuracy offsets the gain of superior ballistics? In a vacuum, that aspect of shooting may gradually get worse from the .22LR onward. I think it is a fallacy to lay out all the serval hundred cartridges from smallest to biggest and say that on either side of one, here and there, more accuracy is possible, so that it looks like a wave of accurate versus not. They are just small pressure vessels, they don’t determine accuracy.
Some could attain the same velocity, using less power, brass, or length than others, but we aren’t really worried about that in target shooting. In order for cartridges to affect accuracy, they would literally have to be designed in a way that they don’t each burn powder the same, from one to the other. This is nearly impossible to envision in the single, bulbous chamber configurations we have.
If a person has nines from wind calls alone, as opposed to rifle inaccuracy, then they logically stood to gain from higher external ballistics. Any “greatest” contender is going to slot in below something that already exists.
It's going to Be, extremely Hard, to "Beat",.. the 6.5 Creed and 6.5 x 47 Lapua for, 800 & 1,000 Yard Accuracy unless, you go to, a 7 MM of some sort ( the .284 Win / Variants and the 7mm SAUM, come to Mind for, that ).The 6.5 Creedmoor took America's attention by storm, but it's been a while since its introduction. Love it or hate it they make more match ammo great bullets and cases for a Creed than anything else. But I imagine some manufacturer is getting antsy to come out with something new. But I am uncertain as to whether the current scramble to make guns and components to keep up with demand will stifle a new introduction. But sooner or later some maker of rifles will want a bigger piece of the pie. What will be the new latest and greatest rifle cartridge to be introduced? Will it be another Hornaday offering or will someone else come up with it?
Yup,. I LOVE, the 6.5 Creed with 123 and 130 Grain ELD-M's or, Sierra's, in,.. a BRAKED Rifle !From the way things are going with the aging population, it will be something with no recoil or very little.
Did it?The 6.5 Creedmoor took America's attention by storm....
Watch Texas Plinking, 1,000 Yard, Steel Challenge and find Out,.. for yourself !Did it?
I showed up to my range and my shooting buddy was shooting a cheap plastic factory Savage that he had screwed on an aftermarket 6.5 creed tube. He was shooting 143 or 147 factory (can't remember) Hornady ammo at the 300 yard target. I jumped in with him to go check the target. I was expecting 3ish inch groups. 3 nice little 3/4 inch groups ....all piled onto the mothball!!Watch Texas Plinking, 1,000 Yard, Steel Challenge and find Out for yourself !
Season 3, shooter, #3 or, 4,.. gal named, Courtney ( Watch Her Group,.. "around", the Steel Plate ! )
Smack Plate on 4th / 5th, Shot, THEN she, Smack's the 5 inch Plate,.. on FIRST Shot !
Many shooters, have Won this, Comp with, the 6.5 Creed and EVEN using,. Factory Ammo !