What causes POI to wander?

[Coyotefurharvester]

The pump/semi auto Remingtons using the 2 bolts to mount barrels tend to "wander" in a angular(distance related) circle. All sorts of mounts, systems designed to minimize the barrels circular travels from/while firing.

 

[JFrank]

Ditto’ Well tuned should be stable.
I recently tested a combination that was said to be temperature sensitive yet what I found was even though the speed increased the point of impact remained relatively stable.

Personally, I have not noticed any tuned and tested loads causing POI shifts or at least that I could confirm by testing

 

[6.5 forever]

I'll blame climate change. It's ruining everything!

 

[memilanuk]

The groups were 33rds

Yes... they were 33 rd 'composite' groups. The centers of the individual 3-5 shot groups making up the composite groups did move around a bit - because they were 3-5 rd groups ie very small sample sizes. The individual group sizes and POIs will vary around the mean values in a quantifiable manner.

 

[drop_point]

Yes... they were 33 rd 'composite' groups. The centers of the individual 3-5 shot groups making up the composite groups did move around a bit - because they were 3-5 rd groups ie very small sample sizes. The individual group sizes and POIs will vary around the mean values in a quantifiable manner.

But why with one load, but not the other two? That’s what has me scratching my head.

 

[AckleymanII]

Some years ago, I had a discussion about this with Steve Hendry. He said that they found that when the barrel is not torqued to 100 ft/lbs these things can happen.

 

[JFrank]

What’s that say about all the national champions that only torque to 50-65 lbs . Did they just get lucky ?

 

[Tireguy]

Do not marry your zeros!

 

[David Milisock]

I'll blame climate change. It's ruining everything!

HOW DARE YOU!!

 

[memilanuk]

But why with one load, but not the other two? That’s what has me scratching my head.

I haven't gone and downloaded the spreadsheet with the 'raw' data yet... but I'd be surprised if there wasn't some slight movement of the POI even on the others.

Look up the term "standard error of the mean" aka 'SEM' and think about how it might apply to this scenario.

One thing that someone (Miles, from the Hornady podcast) said at some point that really struck a chord for me was (and I'm paraphrasing heavily) that everyone is focused on the sample size of 20, or 30, or whatever. But if you have any background in the most basic statistics... that n=30 sample size is the *floor*, the bare minimum, where it more or less reliably mimics the actual larger population behavior.

That doesn't mean that it's 100% truth, or that the characteristics (size, mean, SD, POI, whatever) won't vary slightly from the true population. We - myself included - tend to see these 'point' statistics and think that's that, there we go, we have a number, done. Reality is... not really.

That starts getting a little bit further down the rabbit hole than most of us want to ever deal with, and most of us are perfectly happy - and shoot perfectly well - with the much more simplistic view of how things work.

It's all good

 

[bozo699]

Caught my attention.
What make torque wrench and model?
How was it ‘calibrated’? By whom?
Really want to know as I have quite a few.
I don’t wonder about the beam type (Stutevant) as I doubt anything happens to them. But that’s foot pounds (lbsft) .
My inch pound ones are not. Is there even an inch pound beam style?

Yes lots of them
Wayne

 

[M-61]

Yes lots of them
Wayne

Thanks for taking the time for your educational reply.

 

[M-61]

I’m looking for a beam type inch pound torque wrench whose mid range is about scope ring and base numbers. 18-40 inch pounds

 

[bozo699]

Thanks for taking the time for your educational reply.

I’m sorry after I get the mill up and running I’ll take the time to look up a list of options for you. I miss understood your post I guess I just thought you wondered if they made them.
Wayne

 

[M-61]

I’m sorry after I get the mill up and running I’ll take the time to look up a list of options for you. I miss understood your post I guess I just thought you wondered if they made them.
Wayne

Don’t do it. I can. I’ve always looked after myself just fine

 

[bozo699]

Thanks for taking the time for your educational reply.

https://www.napaonline.com/en/p/BK_7761950

Presa 3/8 in Drive Beam Style Torque Wrench, 0-80 ft.-lb. PS00600 | Zoro

Order Presa 3/8 in Drive Beam Style Torque Wrench, 0-80 ft.-lb., PS00600 at Zoro.com. Great prices & free shipping on orders over $50 when you sign in or sign up for an account.

www.zoro.com

Presa 3/8 in Drive Beam Style Torque Wrench, 0-80 ft.-lb. PS00600 | Zoro

Order Presa 3/8 in Drive Beam Style Torque Wrench, 0-80 ft.-lb., PS00600 at Zoro.com. Great prices & free shipping on orders over $50 when you sign in or sign up for an account.

www.zoro.com

TW-1.2 Beam-Type Torque Wrench — 0–14 Nm

A straightforward tool for properly tightening components and fasteners with torque values under 14 Newton meters.

www.parktool.com

I’ll find more later I hope this was more informational than my last post
Wayne

 

[Walt Krafft]

I just read the whole post. Everybody is blaming everything but the shooter. I constantly hear shooters say they are finding their zero. Or, their zero is changing. Or, my zero was off, thats why my group is off. If you ask the top winning shooters, they will tell you their zeros rarely change as the season moves along. Shoot more. Get more consistent in your position and gun handling. Your zeros should firm up.

 

[memilanuk]

Yes, but... I'm going to go out on a limb and say Glasscock probably has a pretty good - I'd even say better than average - handle on that sort of thing. Just a guess, tho

But to your point, yes, gun handling can absolutely influence the POI. Back when I (briefly) dabbled in VFS, the local range was configured such that the 200 yd berms were literally 'above' the 100, and the 300 was above *that*. So when you were shooting at the 300 yd target, the rest was up about as far as it would go and the rifle fore end wasn't sitting down flat in the bag, but angled up. As you worked your way around a HBR/VFS target, the poi would shift noticeably. Particularly maddening when going from the sighter bull back to record... Some of the old salts had angled blocks to go under the feet of their rests to 'level' things out.

 

[Bottom Fodder]

One of the range day things I do is work on ME to keep my POI from changing

 

[Coyotefurharvester]

Dry firing is an easy way to determine if your rest/bag setup change is going to show up as a poi shift.