Accuracy nodes for 168-169gr in .308Win

[sparker]

Looking for a node around 2820-2850 fps from a 30” barrel.

 

[sparker]

Anyone??

 

[J.d. Popkes]

Anyone??

What is the question

 

[sparker]

Looking for confirmation from someone who has established such a node exists

 

[Bill Norris]

Looking for a node around 2820-2850 fps from a 30” barrel.

Was shooting both with my 24 inch barrel @ 2750 fps before I sold the rifle to my Son. The load was not max. so you may be able to get there.

 

[sparker]

Thank you

 

[sparker]

Thank you

 

[Idaho-Lefty]

Anyone??

Most of, the Serious, .308 Win Shooters have,. LONG SINCE,.. went to , 6.5 Creedmoor for,.. Obvious reasons.

 

[Idaho-Lefty]

April Fool's ?? Probably,.. NOT,.. .LOL !
SORRY,.. I couldn't Help Myself ,.
But 6.5 Bullets,.. DO "Fly",.. so NICE !
Sweet, LOW Recoil, too !

 

[JerkyFreak]

Most of, the Serious, .308 Win Shooters have,. LONG SINCE,.. went to , 6.5 Creedmoor for,.. Obvious reasons.

Then they couldn't have been that serious then.

Imagine, throwing away your man card to get a man bun.

 

[Zero333]

My 308win. 168 gr. loads

H-4895... 41.5 & 42.5 gr

Varget... 43.5 gr

Win-748... 43.6 gr.

 

[gpoldblue]

Looking for a node around 2820-2850 fps from a 30” barrel.

A node is where you find it....there is no set accuracy node for a given barrel....too many variables such as
chamber spec's,,freebore length,freebore diameter,leade angle,twist rate,bore/groove diameters,and say nothing about ambient conditions....nodes change with conditions. You just have to start working with what you have and be ready to make adjustments.
Good luck and stay safe.

 

[William Vogel]

Looking for a node around 2820-2850 fps from a 30” barrel.

I shoot 45.6 grains of IMR 4895 with Hornady 168ELD @ 2.92 COL 2820 and it shoots through the same hole from a 26 inch barrel.

 

[sparker]

Thank you