Ivey FX Integral Rings

[ljmontano]

I was lucky enough to get called to the prize table at the SWN and picked up a set of Ivey Integral Rings. The quality is out standing! I called the owner Stephen Ivey to thank him for the donation and what a good guy to talk too. Stephen was telling me he has been working on the Ivey FX Integral Rings design for approximately 6 months for the F Class crowd. He has two lugs on the bottom of the scope mount that fit into the scope rail and when you attach the Integral Rings to the rail and push the mount forward to attach the mount to the scope base there is very little movement between the mount and slots of the scope base. If you go to his website he has a good video of the design and installation of the Ivey FX Integral Mount. Picking this mount up off the prize table was perfect timing for a new 300WSM build.

 

[Kurz]

 

[6BRA]

View attachment 1532431

is that a Panda?

 

[ljmontano]

is that a Panda?

Yes

 

[6BRA]

Yes

I was told you couldn't use a 1 piece on a Panda. There seems to be an exception.

 

[avidflyer]

I was told you couldn't use a 1 piece on a Panda. There seems to be an exception.

must be panda spacing...correct they have always been a non standard picatiny foot print

 

[ljmontano]

So I removed one of the lugs so it will fit, this morning I talked to Stephen and I believe he is going to add a slot for the Panda action. He was going to contact kelby’s for the correct spacing and enter it into the program, he said that maybe done as early as today.