Neck turning for success.

[Wild Bill IV]

Just don't hurt your arm patting yourself on the back...

Can't reach that far back with atheists setting in!!!!

 

[Dave M.]

Ok Dave, tell me where I can compete when I live in northwestern Kansas!! By the way, I'll take yah on shooting without optical magnification any day with my CG 63 w/ 29.5" long Norma barrel specifically made for 300 to 600 meter prone shoots!!! Plus, I've been shooting long range open sights for over 50 years!!! Starting with an 03A3 w/ air gauged barrel and military 30 cal LC match ammo shooting at 55 gal barrels over 1/2 mile away!!!! Went through 3 tins before I graduated from High school!!! I have played the long range shooting game for a long time!!!! Probably shot over 10K rounds at plus 600!!! Yeah, shooting in those days was a nickel or dime a shot!!!!! And with a Bonanza coax press, very accurate reloads with neck reamed cases!!!! Very few reloaders neck turned then!!! And, my neck reamed loads were much more accurate than two other neck turned reloaders/shooters @ LR!!!

lol. Someone woke up on the wrong side of the bed. Since we are throwing things out to take the other guy on in that they never said they could do, why don’t we foot race, throw a football for distance or accuracy, or see who can hit a golf ball or softball further….none of which you’d win, I can assure you of that.
I live in Michigan and drove to a 1000 yard F class event in Tennessee, it was an 11.5 hour drive. I don’t exactly know Kansas, so I’ll refrain from making suggestions for where you can go shoot. Not sure why you are so red assed about shooting open sights or neck reaming??? I never said I did either and have never pretended to.
Good luck in life and I hope you have a great new years.
Dave

 

[memilanuk]

Ok tell me where I can compete when I live in northwestern Kansas!!

Forums - F-Class Info

vBulletin Forums

www.fclass.info

Look under the "Rocky Mountain" region. If you're in NW Kansas, then there should be ranges in both Colorado and Nebraska that are within driving distance.

By the way, I'll take yah on shooting without optical magnification any day with my CG 63 w/ 29.5" long Norma barrel specifically made for 300 to 600 meter prone shoots!!! Plus, I've been shooting long range open sights for over 50 years!!! Starting with an 03A3 w/ air gauged barrel and military 30 cal LC match ammo shooting at 55 gal barrels over 1/2 mile away!!!! Went through 3 tins before I graduated from High school!!! I have played the long range shooting game for a long time!!!! Probably shot over 10K rounds at plus 600!!! Yeah, shooting in those days was a nickel or dime a shot!!!!! And with a Bonanza coax press, very accurate reloads with neck reamed cases!!!! Very few reloaders neck turned then!!! And, my neck reamed loads were much more accurate than two other neck turned reloaders/shooters @ LR!!!

Nobody cares.

 

[Wild Bill IV]

lol. Someone woke up on the wrong side of the bed. Since we are throwing things out to take the other guy on in that they never said they could do, why don’t we foot race, throw a football for distance or accuracy, or see who can hit a golf ball or softball further….none of which you’d win, I can assure you of that.
I live in Michigan and drove to a 1000 yard F class event in Tennessee, it was an 11.5 hour drive. I don’t exactly know Kansas, so I’ll refrain from making suggestions for where you can go shoot. Not sure why you are so red assed about shooting open sights or neck reaming??? I never said I did either and have never pretended to.
Good luck in life and I hope you have a great new years.
Dave

You have a good year!!!! THINK SMALL, HIT BIG!!! Good luck at you're matchs!!! By the way, you would win in all the above, none shooting sports!!! Smoker for 50+ years, meniscus damage in the left knee, short arms on a 5'6" frame, and turning 68 this month!!!
BILL

 

[Dave M.]

You have a good year!!!! THINK SMALL, HIT BIG!!! Good luck at you're matchs!!! By the way, you would win in all the above, none shooting sports!!! Smoker for 50+ years, meniscus damage in the left knee, short arms on a 5'6" frame, and turning 68 this month!!!
BILL

It’s “matches”. lol.
I’m pretty sure I’d outshoot you in F class too Big Bill, but I doubt we will ever know. You gotta quit smoking, that shit is no good for you.
Dave

 

[G-Man]

I thank those who started talking about my product. I would like to point out that it is not an aggressive chemical, does not cause skin problems and is not harmful if inhaled or ingested. Of course I recommend not leaving it within the reach of children. No OIL Lube Delta Carbon must be shaken before use and a drop on the neck and a drop on the Pilot is enough to ensure excellent processing on the lathe. It dries easily in a dry place, perhaps upside down in a rigid Lapua box that has a grill. For the Expander Die step, just wet the neck in a few drops in a used beer cap and pass as soon as you see the bubble at the end of the neck to the expander to have an excellent clean job without scratches or tears inside the brass. It should not be washed but left to dry. The dry life lubricating polymers will promote a smooth and consistent ammunition seal for all your ammunition. The SD is very low.. tests done with AMP press give very compact graphs.... Sorry for my English but it's not my native language but I hope I made myself understood.
Best Regards and Merry Christmas to all

Sandro Caroselli

I've used the No Oil Lube Delta Carbon and the stuff works very well. And the best part I was not sent to the dog house for stinking up the house! I'm a no body so my word / response may not hold much weight however both F Class John and Bryan Zolnikov "The Witch Doctor" have posted video's using the product. We are always looking to improve our process this just may be the product you've been looking for it was for me!

 

[Delta Carbon Precision]

Thank you for share my Lube No Oil and your experience…. I apreciate
Sandro