Vudoo single shot sled

[Jason Avila]

Does anyone make a single shot sled for a newer Vudoo v22 repeater? It seems as if Vudoo changed there design sometime around when they started making repeater actions, and now they don’t make the single shot conversion sled anymore.

 

[Chilly807]

If you can't find one and are reasonably handy, you can make an insert for your existing magazine.
I've done this with a couple of mags that I was having trouble finding a sled or SSA for.
I used a piece of white nylon (delrin maybe?) and cut a square piece that would fit into the mag like a loaded round. Then file or grind a concave surface into the top edge, and adjust the angle so that a round laying in the groove feeds neatly into the chamber using either the tip of your finger or the bolt feeds it.
If the front edge is slightly high to aid in feeding, the bolt will push it down into the mag as it closes, then it pops back up when the bolt opens.
There was a guy on Rimfire Central that was making them for sale a while ago, if you wanted to go that route.

 

[shoot4fun]

Does anyone make a single shot sled for a newer Vudoo v22 repeater? It seems as if Vudoo changed there design sometime around when they started making repeater actions, and now they don’t make the single shot conversion sled anymore.

KLM7201 on Sniper's Hide makes a 3D printed single-shot sled.
It's the same dimensions as a Vudoo mag and mine works perfectly.
I'm going to PM you the info I have for him.

 

[Jimmiecrackcorn]

Hello I coukd use a single shot adapter for my vudoo if you coukd send me the info

 

[Fuj]

Check on Flea Bay. There were several sellers with 3-D printers
making quite a few different brands, and cheap.