• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Cfe223 and hangfires?

Skattergun

Silver $$ Contributor
Loaded a few rounds with cfe223 in my 6.5x47 with cci450 and had consistent hangfires, just a couple tenths of a second but hangfires nonetheless. Anyone experienced this?
Load was 36+gr
Going to try a fresh pack of primers just to switch something up and try it again.
 
Had the same in 308 Win Palma SRP brass. Two complete misfires too. No problems and reasonable MV consistency in standard LRP Lapua brass. It seems this powder needs more aggressive ignition once you get to 6.5X47L and larger cartridges than many (all) SR primers can supply.
 
I had hang fires with it in an improved .308... and some blown primers. Never had a problem in a 223 case.
 
You will have hang fires with small Rifle Primers and case that holds over 35 gr of powder! the cases may handle high pressures but, If it don't light off What good are they? Any case that holds over 35 grains of powder needs a Large Rifle Primer. Any case over 60 grs needs a Large Rifle Mag Primer!
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,259
Messages
2,215,110
Members
79,497
Latest member
Bie
Back
Top