SuperTrickler

[Larry Koch]

The turtle always win the long game. I still have to trickle the powder in very slow. so 5 seconds vs 8 seconds, no difference. I'm using a 12" drop tube do the make a longer one??

 

[BartsBullets]

The turtle always win the long game. I still have to trickle the powder in very slow. so 5 seconds vs 8 seconds, no difference. I'm using a 12" drop tube do the make a longer one??

If you’re not already doing it. Try slowly spinning the Case while slowly pouring the powder in your drop tube. That will stack it in for ya! Maybe get you back down to a 6 inch drop tube.

Bart

 

[Larry Koch]

If you’re not already doing it. Try slowly spinning the Case while slowly pouring the powder in your drop tube. That will stack it in for ya! Maybe get you back down to a 6 inch drop tube.

Bart

Thanks will give it a try. I might make a vibrating device to attach to the drop tube.

 

[BartsBullets]

Thanks will give it a try. I might make a vibrating device to attach to the drop tube.your electric toothbrush

Touch your electric toothbrush to the side of the case. Pro Tip - cover the opening of the case with your finger. Ask me why I know.

 

[shoot4fun]

What's the two sentence version? It looks like an autotrickler with a cover. Is there more to it?

Also accepts your favorite K-Cup.

 

[Shinbone]

If you’re not already doing it. Try slowly spinning the Case while slowly pouring the powder in your drop tube. That will stack it in for ya! Maybe get you back down to a 6 inch drop tube.

Bart

Any suggestions on an easy way to spin the case while dropping the powder? Sounds like it could take an extra hand or two to do this . . .

 

[Larry Koch]

After fussing with different case fill methods. A long powder drop tube with a very small inside diameter seems to work the best, and quickest.
Thanks for all the tips and tricks.

 

[BartsBullets]

Any suggestions on an easy way to spin the case while dropping the powder? Sounds like it could take an extra hand or two to do this . . .

One of these can help.

 

[Shinbone]

Looks great. Thanks!

 

[JimSC]

a

Any suggestions on an easy way to spin the case while dropping the powder? Sounds like it could take an extra hand or two to do this . . .

a test tube shaker might do it, you can find them on Ebay for about $50

 

[Shinbone]

The test tube mixer looks good. I've been using an electric toothbrush, which works reasonably well. The test tube mixer looks a little more convenient.

 

[JimSC]

The test tube mixer looks good. I've been using an electric toothbrush, which works reasonably well. The test tube mixer looks a little more convenient.

no clue how well it would work with dropping powder. if you are handy with a soldering iron one of these , a AA battery holder, a switch and some epoxy and you are in business for les than 20 bucks

https://www.amazon.com/dp/B09KBQ6LPN/ref=sspa_dk_detail_2?pd_rd_i=B09KBQ6LPN&pd_rd_w=2gPGf&content-id=amzn1.sym.9c4a1809-b111-459c-9b6d-9a2e2b404a6a&pf_rd_p=9c4a1809-b111-459c-9b6d-9a2e2b404a6a&pf_rd_r=0RZ89ETVACNG17M4PRZB&pd_rd_wg=9kP3R&pd_rd_r=210d6b4f-277b-4adc-aff7-b32932525412&s=home-garden&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWxfdGhlbWF0aWM&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExOEtIWlFYQ1RUM0lMJmVuY3J5cHRlZElkPUEwNjg1Mjk1MlBTRlBGU1A3UjdISyZlbmNyeXB0ZWRBZElkPUEwMTQ5MDQ1UVE0TEc4NlA5UlpFJndpZGdldE5hbWU9c3BfZGV0YWlsX3RoZW1hdGljJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ&th=1

or salvage one from a old cell phone

 

[michaeljp65]

a


a test tube shaker might do it, you can find them on Ebay for about $50

Ive been using a similar one for years for my 20VT. They are great.

 

[Sebrock]

Does the Supertrickler come with the latest firmware or is it something Im going to have to update. Im not on facebook so cant ask there.

 

[BartsBullets]

Does the Supertrickler come with the latest firmware or is it something Im going to have to update. Im not on facebook so cant ask there.

I just got mine last Friday. It came with 2.0 installed. I think 2.10 is the latest.

 

[Sebrock]

I just got mine last Friday. It came with 2.0 installed. I think 2.10 is the latest.

Thanks.

 

[F Class John]

They also send emails out when there’s a major firmware update or you can just check their website for the most current version. I hate Facebook too but it all can be done without Facebook. Updates take just minutes to do if necessary. Very easy.

 

[Sebrock]

They also send emails out when there’s a major firmware update or you can just check their website for the most current version. I hate Facebook too but it all can be done without Facebook. Updates take just minutes to do if necessary. Very easy.

Thanks - Im actually on the site now reading the documentation - wow these guys are thorough. Very impressed - and a little confused. Will be fun to learn to use this to its fullest. I’m sure it’s easier than it looks. Will have to watch your videos again.

 

[BoydAllen]

Drop tube trick: I read somewhere about threading the inside of a Harrell style drop tube. Looked around and found a long tap that was right for the the .22 cal. tube and threaded the top couple of inches inside. It causes the powder to spin all the way down the tube, slowing is considerably in the process. After some use it picks up graphite and looks ugly, but it continues to work as designed.

 

[drop_point]

I just got notification my unit is going to ship 2/8. Looking forward to it.