• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

SuperTrickler

Timon said:
Hey Dr Jay, what’s your order #? There was a post yesterday that #542 will be shipped out on the 12th.
Click to expand...
Timon, just now getting around to reading some of the posts on this subject. I sent an e-mail to them asking if my order had went through and it had and my order # is774.
 
Dr. Jay said:
Timon, just now getting around to reading some of the posts on this subject. I sent an e-mail to them asking if my order had went through and it had and my order # is774.
Click to expand...
You should not be real long, they posted yesterday that #600 goes out this week.

Scott
 
Timon,

Will you post the reply you get? Im #763 so probably same as you. Last I had asked they said around Christmas time but this was before the sticker issue (although that might not matter since things were ready to go already and wouldn't stop production).
 
I just got the V4 and really like it. Especially how the main powder tube runs back a 1/2 turn to prevent powder form dropping, when the powder cup is not there. And it runs on a small 5 pound battery all day.

I'm thinking like Jackiesmith when the "new superduper supersonic nuclear powder dispenser" comes out later next year. That' going to anneal, deprime, reprime, case size, turn necks, and seat bullets and powder charge. in one easy step.
 
Last edited:
I was order #144 so I had an earlier one. Had a new fx and set it up. I've updated the firmware a couple of times it's easy. Each time improvements were witnessed. Although I was able to tweak the settings for good results myself. I have had all of Adams models. Both are good products. I find myself using the ST even with a few overthrows it's faster for me. If I'm looking for 30.5 gns of powder I'll actually set the ST for 30.49 this will limit me to kernel errors. I still have a lot to learn on the ST. Both Rex and Peter are good people.
 
gotcha. i use a talentcell to power my chargemaster for days. was curious to know if it would adapt to the supertrickler inputs?? maybe someone with one in hand can chime in if they do a remote power versus plug in to wall socket
stan

TalentCell Rechargeable 6000mAh Lithium ion Battery Pack for LED Strip and CCTV Camera,12V DC Portable Li-ion Batteries with AC/DC 12.6V 1A Charger, Black​

 
spike-55 said:
gotcha. i use a talentcell to power my chargemaster for days. was curious to know if it would adapt to the supertrickler inputs?? maybe someone with one in hand can chime in if they do a remote power versus plug in to wall socket
stan

TalentCell Rechargeable 6000mAh Lithium ion Battery Pack for LED Strip and CCTV Camera,12V DC Portable Li-ion Batteries with AC/DC 12.6V 1A Charger, Black​

Click to expand...
Too weak for the v4.
 
Dusty Stevens said:
Jackie rinses his loading equipment in saltwater before storing them in a sealed metal box with no dessicant. One thing i can say is they havent changed in the 15 years ive seen them.
Click to expand...
You're short a few years. I remember them from at least 20 years ago.
 
Just when I thought it was safe for my CC to come out of the wallet and get some fresh air!
Well I ain't playin'! :eek: Super Trickler?!UUUUUUUGHHHHHHHHH!!!!!!!
So, as usually goes, I waited for all the "bugs" to get worked out of the Adam's V3 to buy. Turns out mine may have been the last of the V3 parts and even before I had mine set up he had the V4 for preorder.
Now, after using the V3 for a while, I really found the only detraction from an otherwise great powder dispensing system was the trickler. No matter how hard I tried I just couldn't make myself happy with it. That's when @Gabe22BR gave me the scoop on a replacement from Ingenuity Precision. I can say it has brought a smile to my ugly mug. It's fast, easy and accurate as @BartsBullets!
It wasn't cheap but it beat getting in line for the V4 and spending more mags $$$.
Not sure the Ingenuity Precision will interface with V4 but
 
shoot4fun said:
Just when I thought it was safe for my CC to come out of the wallet and get some fresh air!
Well I ain't playin'! :eek: Super Trickler?!UUUUUUUGHHHHHHHHH!!!!!!!
So, as usually goes, I waited for all the "bugs" to get worked out of the Adam's V3 to buy. Turns out mine may have been the last of the V3 parts and even before I had mine set up he had the V4 for preorder.
Now, after using the V3 for a while, I really found the only detraction from an otherwise great powder dispensing system was the trickler. No matter how hard I tried I just couldn't make myself happy with it. That's when @Gabe22BR gave me the scoop on a replacement from Ingenuity Precision. I can say it has brought a smile to my ugly mug. It's fast, easy and accurate as @BartsBullets!
It wasn't cheap but it beat getting in line for the V4 and spending more mags $$$.
Not sure the Ingenuity Precision will interface with V4 but
Click to expand...
Ive had an Ingenuity on order for a few months now. Maybe I’ll see it after Christmas.

Bart
 
shoot4fun said:
Just when I thought it was safe for my CC to come out of the wallet and get some fresh air!
Well I ain't playin'! :eek: Super Trickler?!UUUUUUUGHHHHHHHHH!!!!!!!
So, as usually goes, I waited for all the "bugs" to get worked out of the Adam's V3 to buy. Turns out mine may have been the last of the V3 parts and even before I had mine set up he had the V4 for preorder.
Now, after using the V3 for a while, I really found the only detraction from an otherwise great powder dispensing system was the trickler. No matter how hard I tried I just couldn't make myself happy with it. That's when @Gabe22BR gave me the scoop on a replacement from Ingenuity Precision. I can say it has brought a smile to my ugly mug. It's fast, easy and accurate as @BartsBullets!
It wasn't cheap but it beat getting in line for the V4 and spending more mags $$$.
Not sure the Ingenuity Precision will interface with V4 but
Click to expand...
The Ingenuity Precision will work with the V4. However I can not get mine to match the speed of it with the V3. Even on the fastest setting it slows down too much for the last few kernels. It’s still a great set up and results in very few overthrows.
 
Rich S said:
The Ingenuity Precision will work with the V4. However I can not get mine to match the speed of it with the V3. Even on the fastest setting it slows down too much for the last few kernels. It’s still a great set up and results in very few overthrows.
Click to expand...
I like that I can set my Ingenuity to throw a hair short and hand trickle the last kernel(s) by listening to the clink of the mechanism. But I usually let it do it’s thing.
 
The Ingenuity Precision on the V4 is awesome. I very rarely get an overthrow. While its dispensing Im seating a bullet from the last charge. I dont have to wait on it after Im done seating a bullet.
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
166,264
Messages
2,214,743
Members
79,487
Latest member
Aeronca

Share This Page

Back
Top