30 BR with Lapua 100 grain Target bullet for VFS

[Bill Norris]

37.1 of H4198 with Bib 112s ?

+ 1 ?

 

[JimPag]

+ 1 ?

I think his numbers are off. 37.1 in a regular 30BR cases with H4198? Not possible. With LT30 yes.

 

[TIMO]

The 37.1 of H4198 is in my 30 BRS. it is a 30BR improved.
Tim

 

[AlNyhus]

The 37.1 of H4198 is in my 30 BRS. it is a 30BR improved.
Tim

That's the range I used in my 30BRX with 117's on the 1.00" jacket.

With the 45.0 gr. water capacity 30 WolfPup, normal ranges of H4198 were around 42.5-43.0.

Good shootin' -Al

 

[FNSafari]

That's the range I used in my 30BRX with 117's on the 1.00" jacket.

With the 45.0 gr. water capacity 30 WolfPup, normal ranges of H4198 were around 42.5-43.0.

Good shootin' -Al

Al,
That was you and Stan's creation correct? I have a 1-14 T Hart that Gary re-chambered from 30x47 to 30x46 with my Henriksen 30BR reamer. It shoots 38.5 of H4198 pretty well with bib 118-10's. Guess I have been underutilizing its capacity a bit? Merry Christmas from Maine and Happy 2023!

 

[AlNyhus]

Al,
That was you and Stan's creation correct? I have a 1-14 T Hart that Gary re-chambered from 30x47 to 30x46 with my Henriksen 30BR reamer. It shoots 38.5 of H4198 pretty well with bib 118-10's. Guess I have been underutilizing its capacity a bit? Merry Christmas from Maine and Happy 2023!

Yes it is, Greg. In my opinion, a 30X44 is just about the perfect case size for a BR level .30.

Merry Christmas to you and yours and stay warm. Wind chills here starting tomorrow will be in the -40 to -50 range for several days. Good time of the year to make bullets! -Al

 

[TIMO]

The 37.1 of H4198 is in my 30 BRS. it is a 30BR improved.
Tim

Here is a pic, 30BR on the left, 30BRS on the right. .080 longer at the shoulder.

Tim