Old Dasher brass in New 6Norma Dasher chamber?

[ARK]

Another silly question for you experienced shooters.
With all the craziness getting components I wonder if I can shoot old Dasher brass in Dasher Norma chamber?

 

[Dusty Stevens]

No. The norma dasher is its own animal

 

[swd]

The Norma Dasher was ever so slightly tighter at the back end and has a .050” longer neck. I know someone (not me!) who trimmed his Norma Dasher brass back to Lapua spec by accident and shot it that way with no problems at all, lol. It was just as accurate as it was later with the proper length brass. But have you checked Norma USA? Last week someone posted that they had Norma Dasher brass in stock.

 

[Dave M.]

Another silly question for you experienced shooters.
With all the craziness getting components I wonder if I can shoot old Dasher brass in Dasher Norma chamber?

Don’t do it. New brass for every barrel. Brass always stays with that barrel. Period. Best advice you could follow.
Dave

 

[Jet]

This counters what has been discussed above but I have done it and still do in a PRS rifle and it shoots great. Better than my Norma dasher brass. I keep my velocities in the 2850 fps range.

 

[JEFFPPC]

Don’t do it. New brass for every barrel. Brass always stays with that barrel. Period. Best advice you could follow.
Dave

Hmmmmm, barrels cut with the same reamer, I have to say if you have brass in good shape, not so. Now in reality I make new brass for every barrel but if its still good at the end of that barrels life, I have done fine with it in a new barrel. I think as the componet crunch continues we will find some previous thoughts we have had are just that, thoughts not fact.

 

[Dean Slater]

Another silly question for you experienced shooters.
With all the craziness getting components I wonder if I can shoot old Dasher brass in Dasher Norma chamber?

Bruno and Bullet Central have Norma 6 Dasher brass in stock.

 

[bugman]

Nope. You will leave some accuracy on the table. If you do, expect sizing issues and extraction clickers, and start over with the tune.

 

[Liven The Dream]

Go to Norma Sales it is available again............. Bruno's also Norma Site Cheaper.

I posted this weeks ago ??????

 

[Liven The Dream]

The Norma Dasher was ever so slightly tighter at the back end and has a .050” longer neck. I know someone (not me!) who trimmed his Norma Dasher brass back to Lapua spec by accident and shot it that way with no problems at all, lol. It was just as accurate as it was later with the proper length brass. But have you checked Norma USA? Last week someone posted that they had Norma Dasher brass in stock.

Thanks SWD