JEFFPPC
Gold $$ Contributor
After my switch from Euber 116s with H4198 and my abbreviated 17 shot load development I posted several months ago here is where I am getting ready for our winter matches at 200 yds. Shooting was at 200 yds and the load I used to this point is the 35.7 which are the center top and bottom row targets. The first group on the top are the 3 shots to the left .276 center to center. When I was done shooting I put a couple clicks in, not enough, and shot the remaining 4 shells I had left into the group on that ring at 9:00 that measures .276. The 2 shots I put the x on are from a bench with a bit of wobble that was a challenge. New range I joined and I will need to pick a bench and fix it. I can pull up to within inches of the benches instead of carrying multiple trips up 22 steps at my old range which has two solid cement benches myself and a friend built and bought the material for. Flag tails were tickling a bit and would very slowly turn a bit , I ignored them and just tried to hold center which was a bit of a challenge on the bench.I think I will stay with the 35.7 which over 10 shots was 3074 fps. Barts bullets work which was a given and the LT30 looks fine, so I feel good to go. Not bad for a barrel with over 7000 rounds. Will shot at 200 yards, the white center in the black rings is exactly .5, it's a stamper I had made up for 200 and 300 yds. For 100 yds I use colored notebook paper reinforcements.
Attachments
Last edited:
