• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

7mm-08 Powder

Praying for powder, but which kind? Have a Kimber 7mm-08 with an 18” barrel and wondering if I should try to attain the fastest burn rate possible for such a short barrel? Will only use this for hunting and considering h4350, h4895, and maybe even rl15,16, or 17. Thoughts greatly appreciated.
 
Praying for powder, but which kind? Have a Kimber 7mm-08 with an 18” barrel and wondering if I should try to attain the fastest burn rate possible for such a short barrel? Will only use this for hunting and considering h4350, h4895, and maybe even rl15,16, or 17. Thoughts greatly appreciated.
RL-15 & 19 always worked well back when I shot the 7-08.
 
Praying for powder, but which kind? Have a Kimber 7mm-08 with an 18” barrel and wondering if I should try to attain the fastest burn rate possible for such a short barrel? Will only use this for hunting and considering h4350, h4895, and maybe even rl15,16, or 17. Thoughts greatly appreciated.
Well it would help to know what weight pills you plan to poke out of it.
Had good success with the cheapest Hornady 120 grainers and Varget....if you can get it.

However study of powder burn rates and loading manuals should put you on the right track.
 
Any you ve listed would work great. The 7-08 is not picky. You “might use a little quicker burn if you re shooting 120 gr or lighter bullets. 130 to 160 gr bullets will tolerate slower powders.

Don’t over think it. Good luck finding a power. ( I ve used powders from H335 burn rate to IMR4831 with acceptable performance)
 
My experience:

Rifle: Kimber 84M Hunter 22"
Bullet: 120gr Hammer Hunter
Brass: Lapua
Primer: WLR
COAL: 2.7"
Temp: 25-35 F.
Ave MOA group: .35"
Powders:
IMR 3031 @ 41.5 @ 3075fps
Varget @ 43.5 @ 3025fps

130gr Hammer Hunter, same components, Varget @ 42.8 @ 2960fps
 
My experience:

Rifle: Kimber 84M Hunter 22"
Bullet: 120gr Hammer Hunter
Brass: Lapua
Primer: WLR
COAL: 2.7"
Temp: 25-35 F.
Ave MOA group: .35"
Powders:
IMR 3031 @ 41.5 @ 3075fps
Varget @ 43.5 @ 3025fps

130gr Hammer Hunter, same components, Varget @ 42.8 @ 2960fps
I’ve looked at HH bullets. How do you like them. They are one of a few bullets that I can find available right now.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,358
Messages
2,217,212
Members
79,565
Latest member
kwcabin3
Back
Top