3/4x32 TPI Barrel Tuner or Thread Protector

[Buzz_Man]

I am looking for a Barrel Tuner with a 3/4” x 32 TPI (0.750”x32 TPI) for a 308 cal barrel that is 1” OD at the base of the muzzle threads. I can’t seem to find anything in this size.
Can anyone point me to a tuner and/or an adapture that would allow me to run a barrel tuner.
If a tuner is not possible I would like to buy a thread protector to screw on the end.
Thanks in advance for any help you might be able to provide.

 

[Bill Norris]

I am looking for a Barrel Tuner with a 3/4” x 32 TPI (0.750”x32 TPI) for a 308 cal barrel that is 1” OD at the base of the muzzle threads. I can’t seem to find anything in this size.
Can anyone point me to a tuner and/or an adapture that would allow me to run a barrel tuner.
If a tuner is not possible I would like to buy a thread protector to screw on the end.
Thanks in advance for any help you might be able to provide.

I was also faced with this and could not find any tuner with the 3/4 X 32 threads. One of my long time friends here locally has a lathe and made me a stainless adapter to go from female 3/4 x 32 (barrel end) to male 5/8 X 24 (E C Tuner/Brake) and it worked out perfectly on my rifle. I gave him the dimensions of the O D of my barrel and he was able to get it down to match very good.

EDIT: He left the inside bore of the adapter @ .350 for good clearance of my 243AI

 

[MislMan]

I believe Mike Ezell will make adapters for the tuners he makes and sells. Ezell tuners.
I don't recall his screen name on here.

 

[TIMO]

I believe Mike Ezell will make adapters for the tuners he makes and sells. Ezell tuners.
I don't recall his screen name on here.

Contact Mike here, he is gunsandgunsmithing. I am sure he can help you.
gunsandgunsmithing

Tim

​