New Reamer List for Prefits

[urbanrifleman]

It is my tentative plan to add a .7" taper, and 1" taper to my choices to go with the .86" taper. Both Remage and Savage. I will add some slower twists in .22 and 6mm, and a few 6.5, and 7mm. This will be my next order.

 

[Nick Caprinolo]

Any chance of you doing a 22-250 in 8 twist? Would like to shoot 80gr bullets.

 

[troupe]

6.5x47 lapua reamer

 

[urbanrifleman]

Any chance of you doing a 22-250 in 8 twist? Would like to shoot 80gr bullets.

Yes. Just need the reamer.

 

[Ruddy]

I would be interested in a 6 Creedmoor preferably with a shorter freebore for shooting 70-90 gr bullets.

 

[Nick Caprinolo]

Yes. Just need the reamer.

I will get back to you in a few days.

 

[urbanrifleman]

I have a feeling whatever I buy, people will still be requesting whatever I don't have haha

My best advice is people should invest in their own reamers. That is what I always did. Then you always have it. Especially if it is some rare combination.

 

[urbanrifleman]

Reamers are ordered.

22-250
22-250a
6 Dasher
6 Gt
6 Creedmore
22 Creedmore
22 br
223 issf Palma/ftr .169 FB

 

[urbanrifleman]

I will get back to you in a few days.

I got the reamer you wanted.

 

[urbanrifleman]

20 Practical and 20 Vartarg added.

 

[Greymatter762]

What about a .308 win offering?

 

[urbanrifleman]

What about a .308 win offering?

I barely have anyone asking for them. I could certainly do one. I could get blanks easily.

 

[urbanrifleman]

What about a .308 win offering?

Oh, by the way, I have a customer that sent me his 6TCU reamer. This is the reamer you want It is a 6-223a.

 

[rockhound78]

What slower twists in 22cal would you be offering? 1-10 or 1-12"

 

[urbanrifleman]

What slower twists in 22cal would you be offering? 1-10 or 1-12"

Not a single person has asked for a slow twist 22.

 

[Tommie]

Still considering the 20 BRA?

 

[urbanrifleman]

Still considering the 20 BRA?

Yes. I sending a reamer order this week. Just needed a few dimensions.

 

[Tommie]

Yes. I sending a reamer order this week. Just needed a few dimensions.

If freebore is one of those dimensions, I’d suggest very little. Like .010 at most. The BR neck is super long and can swallow every 20 caliber bullet made. Excessive freebore is just going to reduce the (already short) throat life of a low expansion ratio cartridge which is likely to be used in high shooting volume situations. I designed a similar cartridge and regretted using a .020 freebore.

 

[urbanrifleman]

If freebore is one of the dimensions, I’d suggest very little. Like .010 at most. The BR neck is super long and can swallow every 20 caliber bullet made. Excessive freebore is just going to reduce the (already short) throat life of a low expansion ratio cartridge which is likely to be used in high shooting volume situations. I designed a similar cartridge and I regretted using a .020 freebore.

I am doing zero

 

[Tommie]

I am doing zero

Good choice