ShotMarkers, coroplast and targets?

[PatMiles]

How are you gents attaching your F class targets to coroplast backing for your Shotmarkers? Tape, spray adhesive?

 

[CADDIE5]

Scotch 77 or Elmer's spray glue. Place NRA target on corroplast that was scratched with Scotchbrite for better adhesion. We use magic marker lines in the corners to orient center of target. Then make sure waterline is at proper height in the frame. Holds up in the light rain. We have replacement self sticking centers.

 

[LeoHuhta]

We primer paint (tinted the same color as the target paper) the plastic and then use wall paper paste to glue the targets on.

 

[MGYSGT]

Staples

 

[dc.fireman]

Staples

Me too.

 

[PatMiles]

Staples

Me too.

How well do staples work in the wind with the thin NRA 600 yard targets?

 

[NZ_Fclass]

My club has printed the targets on vinyl. Stay up for half a season. We use Silver Mountain targets.

 

[Steveb]

We order the target faces printed right onto the coreplast by a local commercial printing shop and then use small 12" centers to repair the target centers. So far the targets have lasted over 2 years.

 

[PatMiles]

We order the target faces printed right onto the coreplast by a local commercial printing shop and then use small 12" centers to repair the target centers. So far the targets have lasted over 2 years.

Might have to look into doing the same.

 

[F Class John]

We order the target faces printed right onto the coreplast by a local commercial printing shop and then use small 12" centers to repair the target centers. So far the targets have lasted over 2 years.

We do the same thing. They last through sun, rain and snow year round. No issues and never have to go to pits to repair anything. We do a 2moa offset so our centers never wear out.

 

[Steveb]

We tried the offset method but our group prefers to hit center and replace with paper centers. Neither way is right or wrong but simply preference.

 

[dc.fireman]

How well do staples work in the wind with the thin NRA 600 yard targets?

I haven't had any issues with the NRA C-2 or C-3 targets, and they are printed on very thin stock. I use 8 staples, one in each corner plus one in each of the 'middles'.

 

[PatMiles]

Thanks for the feedback gents.
Couple of different options to explore now.