• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Neat old Mauser in 22 find at LGS

Josh , .22 are soooo picky about ammo , first step is to find what it likes the best.... Good news is that involves taking it out and shooting it.... My first ammo down the tube would be CCI standered velocity , it seems to shoot well in alot of rifles.... All mine love it... Not all do , but most will....
 
Awesome find! Bought a Mauser a couple weeks ago, my first, an 1891 Argentine in 7.65 x 53. Not as nice as yours but still a cool rifle with original length barrel and untouched action. $300 with it in an aftermarket Monte Carlo stock, the original stock (what's left of it), and 5 boxes of PPU ammo. Serial number confirms it was mfd in 1892.
 
PhilC said:
Awesome find! Bought a Mauser a couple weeks ago, my first, an 1891 Argentine in 7.65 x 53. Not as nice as yours but still a cool rifle with original length barrel and untouched action. $300 with it in an aftermarket Monte Carlo stock, the original stock (what's left of it), and 5 boxes of PPU ammo. Serial number confirms it was mfd in 1892.
Click to expand...
I was in the store to pick up an Argentine 7x57 that a guy completely refurbished to “like new” condition, including a re-blue. I sold one years ago and always regretted it. Right now I’m more excited about the 22!
Take a look at the Swedish Mausers. They’re a terrific example of historic Mausers. From what I’ve read, the Swedes required the use of Swedish steel in the manufacturing of their guns. It’s reported to be a much higher quality steel than what was normally used.
Collecting these old guns is a lot of fun if you like history. I usually buy shooters, not museum pieces.
 
I pulled the gun apart today. I was happy to find the absence of any rust or pitting hidden by the stock. I gave the bore a mild scrub and sent the bore scope in. Again, no corrosion or pitting. The bore is surprisingly pristine for such an old gun.
Whoever had this took very good care of it!
I have a Weaver T36 to put on it when I get some rings.
I have a fair stockpile of different 22 ammo to try. I’ll let you know.03FBFC48-75F9-4245-8B2E-BB865AA5BD00.jpeg
 
Last edited:
joshb said:
I was in the store to pick up an Argentine 7x57 that a guy completely refurbished to “like new” condition, including a re-blue. I sold one years ago and always regretted it. Right now I’m more excited about the 22!
Take a look at the Swedish Mausers. They’re a terrific example of historic Mausers. From what I’ve read, the Swedes required the use of Swedish steel in the manufacturing of their guns. It’s reported to be a much higher quality steel than what was normally used.
Collecting these old guns is a lot of fun if you like history. I usually buy shooters, not museum pieces.
Click to expand...
Bought this one to shoot cast with and it's far from a museum piece nor do I intend to make it one. Cool thing is all parts are stamped with same serial number including the hacked original stock.

Just wanted something, well, different. Bore was really rough, so bought a used barrel on eBay which is inifinitely better.

Your 22 is sweet and I didn't know they existed.
 
PhilC said:
Bought this one to shoot cast with and it's far from a museum piece nor do I intend to make it one. Cool thing is all parts are stamped with same serial number including the hacked original stock.

Just wanted something, well, different. Bore was really rough, so bought a used barrel on eBay which is inifinitely better.

Your 22 is sweet and I didn't know they existed.
Click to expand...
Oh, watch out! I started with one and got hooked by the bug. I’d have to think real hard to tell you how many I have now.
Just to tickle your interest, here are my top three favorites that you should buy next:
Swedish Husquevarna M38
Swiss k1911 Straight Pull
Argentine 7x57. (Only because I can’t find a Mexican!)
Good luck!
 
joshb said:
Well, after an hour on Google, it seems the barreled action was made around 1935 to 1940. The stock isn’t original but it’s actually nicer than the original, with a flat forend . I’m going to pull it apart and give it a good cleaning. There’s no sign of rust or pitting on it, that I can see. It has a little “shellac” looking spots on the barrel. Maybe some one used WD 40 on it. All in all, it’s in great shape for it’s age. I’m going to soak the inside of the barrel with Kroil overnight, give it a good cleaning and scope it tomorrow.
I’m not “up to speed” on 22 rimfire rifles.
Question: Would bedding it help accuracy on this one?
Also: The stock touches the barrel along it’s length. Would it shoot better if free floated?
Thanks!
Click to expand...
Clean it first, then shoot it. Before bedding the action and barrel put a very thin piece of cardboard (matches cover) between the stock and action, then tighten. That may help determine if bedding is needed. Nice gun, enjoy!!!
 
joshb said:
Oh, watch out! I started with one and got hooked by the bug. I’d have to think real hard to tell you how many I have now.
Just to tickle your interest, here are my top three favorites that you should buy next:
Swedish Husquevarna M38
Swiss k1911 Straight Pull
Argentine 7x57. (Only because I can’t find a Mexican!)
Good luck!
Click to expand...
That is the truth! Picked up my first at an estate sale, wasn’t even there for it. It was a pretty clean K31 and it went home with me. Haven’t stopped since.
 
You lucky devil ! That was a steal . The rear sight gets $500 all day long . The front is interchangeable. Negc has mauser cf sight blanks that need to be fitted .
I just went to ebay and they have a stock blank for $250 . But it looks like crappy wood and I know when I get my duplicator cleaned off and send you a copy you can do much better . Now to just learn checkering , Ive got the tools , you got the skill .
 
Ggmac said:
You lucky devil ! That was a steal . The rear sight gets $500 all day long . The front is interchangeable. Negc has mauser cf sight blanks that need to be fitted .
I just went to ebay and they have a stock blank for $250 . But it looks like crappy wood and I know when I get my duplicator cleaned off and send you a copy you can do much better . Now to just learn checkering , Ive got the tools , you got the skill .
Click to expand...
Funny you mentioned that! The stock was missing the butt plate so I glued on a slab of Ebony and took a try at checkering to dress it up. It’s not so good but I learned a few things. I made my first cuts too deep and had trouble following them. Since it’s a nice old vintage stock, I shelved any ideas of carving the grip narrower and just wet sanded it with 400 grit and Preacher’s oil.5894AD56-B835-47C8-9182-360682E332AF.jpeg9CC5FC4A-7293-477E-952C-821ED9DA2FF2.jpeg
 
Last edited:
I have a friend that has another but stock isn't original... the weird thing with these is barrel is eccentric to bolt
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,465
Messages
2,196,511
Members
78,936
Latest member
Mitch.Holmes

Share This Page

Back
Top