Converting a repeater into a single shot Rem 700 clone

[Sticks]

I'm looking to convert a Stiller Tac30 SA repeater into a single shot bench gun. Can anyone help me find the hardware to inlet into the bottom of the stock to allow this?

 

[gkgeiger]

I’d start by checking with Jerry.

 

[Sticks]

Who's Jerry?

 

[Dusty Stevens]

Jerry is the guy that used to own the company.
get a single shot follower from ptg

 

[DirtySteve]

Check with Creedmoor Sport for a single shot follower if Jerry Stiller doesn’t have one laying around.

 

[Dusty Stevens]

Short Action (SA) Bench Rest Single Shot Follower for ADL & BDL Inlets - Pacific Tool and Gauge

Short Action (SA) Benchrest Single Shot Follower for ADL & BDL Inlets at Pacific Tool and Gauge

pacifictoolandgauge.com

Jerry stiller sold out of the centerfire business back in 2017 and didnt have followers even then. He is no longer involved in stiller precision firearms he is holeshot arms now only doing rimfire

 

[LVLAaron]

The cheap option is: bed it to a single shot stock and goop up the bottom of your action with some marinetex

 

[avidflyer]

little digging a 3d printed one is easy to come by.

 

[urbanrifleman]

little digging a 3d printed one is easy to come by.

Will not stand up to cleaning solvents. Which is why I don't make them.

 

[Jennb]

You can buy followers and bed them.

 

[jepp2]

Can anyone help me find the hardware

KISS theory. The Score High follower is inexpensive and does what you want unless you are determined to make it more complicated.

http://www.scorehi.com/followers.htm

 

[Dusty Stevens]

KISS theory. The Score High follower is inexpensive and does what you want unless you are determined to make it more complicated.

http://www.scorehi.com/followers.htm

That one is made for putting on top of an existing magazine

 

[jepp2]

That one is made for putting on top of an existing magazine

True, but no reason I see that couldn't be the single shot insert the way it fits the rails, and it provides more stock options.

 

[Dusty Stevens]

True, but no reason I see that couldn't be the single shot insert the way it fits the rails, and it provides more stock options.

Because it doesnt fill the cutout. Its not the same as the single shot adapters that glue in to make it like a 40x action.

 

[Sticks]

I picked up one from Pacific Tool and Gauge. Thanks for your input1

 

[Bob Longo]

Is the PTG follower curved on the bottom? So that it matches the action profile?

 

[Dusty Stevens]

Is the PTG follower curved on the bottom? So that it matches the action profile?

Yes

 

[Bob Longo]

Yes

Thank you Dusty.

 

[Sticks]

Yes, it does have the radius bottom that matches the action closely but not perfectly. My intention is to epoxy the follower to the stock during the bedding process while leaving the action removable.

 

[Dusty Stevens]