Amp Mate & Hornady Case Feeder

[Tpb10505]

Anyone else with this combo? Couldn’t find any images of how folks mounted their Hornady case feeder to their bench to work with an Amp Mate so I could replicate the setup with mine. Also curious b/c the feed tubes provided do not fit into the feed portion of the case feed hopper. Appreciate any help

 

[Hoser]

Cant help with the Hornady part of the puzzle as I am using a Dillon casefeeder.

I used a chunk of 3/4 round bar and welded it to a 12x16 1/2 inch thick plate. This allows me to move the annealer around if needed.

 

[F Class John]

Mine is just held up with PvC. Made a ‘T’ at the bottom and it works great. Maybe five dollars in parts.

 

[PatMiles]

I used a chunk of 3/4 round bar and welded it to a 12x16 1/2 inch thick plate. This allows me to move the annealer around if needed.

With a pallet jack?

 

[Jdne5b]

Anyone else with this combo? Couldn’t find any images of how folks mounted their Hornady case feeder to their bench to work with an Amp Mate so I could replicate the setup with mine. Also curious b/c the feed tubes provided do not fit into the feed portion of the case feed hopper. Appreciate any help

You'll have to experiment with different tubes you can find so see what works. Head to the hardware store and buy a selection.

The stand should be able to be put together as shown with pvc or black pipe from the hardware store.

 

[Hoser]

With a pallet jack?

Heavy is solid. Solid is good.

Moving the annealer around the top of the 1/2 inch plate is easy. Only the casefeeder support is welded to the plate.

 

[Delfuego]

Hoser doesn't do thing half assed. Always top shelf.

 

[PatMiles]

Heavy is solid. Solid is good.

I won't disagree with you there.